No hay artículos en el carro
No hay artículos en el carro Tapa de repuesto para botella de agua de boca ancha de 32 onzas, 40 onzas
Ventajas de la tapa de la boquilla: a prueba de fugas, buen sellado
Sin fugas o sin derrames
Fácil de beber
Flujo de agua suave.
Abre fácilmente la pequeña tapa de rosca en la parte superior, no hay necesidad de quitar toda la tapa al beber, evita derrames
Seguro e higiénico
La tapa de rosca DBIW ayuda a mantener limpia la tapa de la boquilla y el agua dentro
Sin BPA.
Material de alta calidad Tapa duradera
Seguro para bebidas frías y calientes, tapa de repuesto perfecta
Tapa de boquilla de boca ancha (diámetro de boca exterior 2.2 pulgadas), ajuste perfecto debajo de la marca y OZ
Debe cumplir con la marca y tamaños específicos de botellas (dos condiciones)
Compatible con
Tapa para botella de agua Hydro Flask 32 de 40 onzas de boca ancha
Se adapta a Simple Modern Summit (10/14/18/22/32/40/64/84 onzas)
Se adapta a frascos de hierro (22/32/40/64 onzas).
Se adapta a Takeya (14/18/24/32/40/64 onzas)
Compatible con MIRA (12/18/22/32/40 onzas)
*Consejos: tapa de repuesto para una marca específica de botellas de agua, no para ningún frasco.
Necesita tu atención completa:
Nunca lo utilices para otras marcas y tamaños.
La tapa solo para marcas y tamaños específicos de botellas anteriores
No utilizar tapa para abajo
No es compatible con Hydrapeak.
No es compatible con TAL.
No es compatible con Manna.
No es compatible con YETI, no es compatible con RTIC
No es compatible con Growler.
No es compatible con vasos de cerveza/vaso, no es compatible con botellas de agua de boca estándar o boca estrecha
Andrea
Comentado en los Estados Unidos el 3 de mayo de 2024
No se pudo cargar el contenido.
EC
Comentado en los Estados Unidos el 20 de octubre de 2024
I use this but it took awhile to get the gasket to seal. I don't use it for anything but water so I have to just leave it sealed up and not wash it as I cannot get the inner gasket to seal right very easily.
Erin Kokke
Comentado en los Estados Unidos el 23 de septiembre de 2024
Lid fits my 40oz Hydroflask very well. Yhe color isn't accurate based on the photo. It's much lighter than the image conveys but I'll deal with that. I was anticipating closer to the color of the rubber boot in photo
Ebeezee
Comentado en los Estados Unidos el 10 de agosto de 2023
Honestly I was really skeptical. I was super afraid it would not match and I thought the quality would be poor. Welp...it's amazing and it is a huge help when drinking. I found myself drinking more water because the lid makes it super convenient. I purchased this because I got tired of unscrewing the top. Also drinking out of a 40 ounce hydroflask can be very inconvenient. I was always spilling water everywhere like I'm a 2 year old. Lately I've been having issues with my hands. The strength is not there like it use to be. So screwing and unscrewing a top can be a little cumbersome. So I looked for a hydroflask lid replacement and none of them seem appealing. Found this and I have been satisfied since day one. The only thing I would change is the plastic or rubber use for the strap. I would make it wider and thicker. Other than that this is a good replacement. You would never guess it was generic. The color and quality is spot on.
Nieriel
Comentado en los Estados Unidos el 14 de noviembre de 2023
Looks higher quality than other options I was considering. A tad annoying that you have to make sure the handle is on the correct side before unscrewing the cap - I have a bit of unscrewing, opening, then closing the spout lid to move the handle to the other side so I can fully open the lid. Have had similar screw lids but have noticed a higher likelihood on this one of the spout not being screwed completely and leaking where I haven't had that with previous screw lids. Maybe this one takes more turns? Another half turn that I'm not accustomed to? The part that screws onto my 24oz takeya hasn't leaked though! This lid has treated me well and I'm glad I got it. Stained from cold brew tea and lipstick within a month of use, stains haven't come off with attempts. No mold yet though - bane of my existence. I haven't gotten compliments on it but I've admired how it looks on my old beloved limited edition bottle, that also has silver accents. The silicone rings on the spout and bottom are squared off, 90 degree angle rings rather than typical rounded ones. So when/if I buy replacements, idk if the typical rounded ones will be compatible or seal as well. I do like the squared off rings. Harder to remove but possibly, possibly less prone to mold?
Productos recomendados
Mex $189.00
Mex $ 113 .00 Mex $113.00
Mex $577.00
Mex $ 265 .00 Mex $265.00