No hay artículos en el carro
No hay artículos en el carroEl driver de graves programable SansAmp DI es una versión programable de 3 canales del formato de pedal de un solo canal para realizar a los inversores que pueden obtener suficiente de una gran cosa. Súper fácil de operar, los cambios se pueden hacer fácilmente en la mosca, sin tener que consultar el manual del propietario. Simplemente gira los pomos a un ajuste que te gusta, haga doble clic en un interruptor de pie y se guarda en ese canal. Crea y programa tres sonidos, desde limpio clásico a overdrive a distorsión picante, y accede a cada uno al instante. También puede utilizar como el driver de graves programable SansAmp DI una caja de preamplificador o estómago con cualquier amperio/combo, amplificador de potencia y clóset de altavoces, un motor de alimentación de bajo Tech 21 60 o directamente en cualquier consola de mezcla. Características: ¿El camino de señal analógica 100% y la programabilidad digital conveniente? Tres interruptores de pie independientes. ¿Controles de unidad, bajos, agudos, presencia, mezcla y niveles? Entrada de nivel de instrumento de 1/4". Salida de 1/4 pulgadas y XLR con niveles seleccionables? Mide 19 cm de largo x 1,5 cm de ancho x 5 cm de alto en una carcasa de metal. Funciona con energía Phantom, o utiliza una fuente de alimentación de 9 V CC opcional (no incluida), o batería de 9 V. Fabricado en EE.UU.
jcl744
Comentado en los Estados Unidos el 22 de junio de 2021
I have 3 basses and this fits the bill perfectly. I play for a church and we use in ears with our own mixers. I don't use an amp. I use the phantom power so I don't go through 9 volts. I play a EM music man Stingray 5 special with a 18v preamp and a Fender P bass. This allows me to save settings for each bass, so I don't have to start over every Sunday if I play a different bass. The adjustment knobs are nicely weighted and built in features are genius. I've been out of the bass loop for years and I'm so glad I bought this. This bridges the gap from the old on platform amps with all the noise to allowing for the new way. Eliminating or minimizing on stage noise and going with in ear monitors. Have your sound guy set your channel pretty flat and go to work on your tone.
James Miller-Stivers
Comentado en los Estados Unidos el 3 de junio de 2018
I was using my amp and cab for my sound (great when you only need one sound) and then I bought this. Wow!A little backround to the story. I play in an alternative metal band, which means sometimes I need no gain or lots of it. I love my Ampeg set up and mainly I am an Ampeg only kind of guy. When I saw that Ampeg does not have a 3 channel DI for me to use in the manner I need, I had to look elsewhere.This is what I found. The overall control of this unit is amazing. This is my setup: Channel 1 is my base sound. Pretty much what I use 86% of the time. Channel two is my octave chord sound. I use this whenever my guitarist has a solo, this allows my bass to pop out the mids to make it sound like another baritone instrument playing the root notes. Channel three is for one sound and one sound only, heavy distortion. That's right, with enough adjustments between the tone, presence, and gain, this can grant you some great distortion quality. This bass DI is amazing as a DI and as a multi channel pedal. Worth every penny.
カスタマー
Comentado en Japón el 22 de noviembre de 2018
繋いだらノイズが酷くて、とても使える状態ではありませんでした。
kuroneko
Comentado en Japón el 24 de marzo de 2016
ベースの定番サンズアンプ！よく言われるサンズアンプの音って言うのが使ってみてもよくわかりません。一般的な設定にするとドンシャリサウンドになるのでそれの事をサンズアンプサウンドって言うのかな？３つの音を作って保存出来るので使っていたフットスイッチを外しました。DIが付いているのでライブやレコーディングも自分の音を出せます！
Jimmy
Comentado en los Estados Unidos el 20 de junio de 2011
I have only owned the Tech 21 SansAmp Programmable Bass Driver DI for a few days at the time of writing, but I am already in love! The analogue circuitry modifies my bass tone, making it sound more modern, like a pro fridge rig. I use this pedal in conjunction with a Boss ODB-3 (after the SansAmp in the chain) for extra bite, having the SansAmp setup with a clean channel and slightly dirty channel for extra grit (with 2 gain stages it's ultra heavy :D). My current rig is a Yamaha RBX375 bass with a Hartke HA3500 head and Hartke VX410 cab.I have tried turning up the drive and blend controls to full to get a distorted sound, and have found it to be less angry and growly than the Boss ODB-3 on its own. Having said that, setting the SansAmp to clean and slightly dirty levels has made my bass sound very nice, especially when using a slightly higher than average Presence value, for those piercing bell-like high mids on the G-string.Using the SansAmp as a DI is also great, i can plug my bass in then XLR out to my Mbox and record in Pro Tools, sometimes while only using battery power from my laptop (and 9v battery for the SansAmp). The point is, I don't even need to use an amp to get a great sound, it's in the name "sans"amp.The SansAmp is one step closer to getting tone similar to Justin Chancellor (Tool) and Jon Stockman (Karnivool), while their grit sounds are more complex than the SansAmp alone (hence the use of a ODB-3 in conjunction), the way it changes the sound of my bass's clean sound is great!It's also very easy to use (just turn the knobs while a channel is on, then double tap to save that setting) - 3 great (and possibly vastly different) tones in one box! - 3 times more versatile than the Bass Driver DI (non-programmable with only 1 channel).All in all it's an awesome, useful and versatile way to help make your rig sound much more expensive - much more than a simple overdrive.
Productos recomendados
Mex $9,009.41
Mex $ 1,881 .00 Mex $1,881.00
Mex $4,764.68
Mex $ 1,881 .00 Mex $1,881.00
Mex $3,192.59
Mex $ 1,564 .00 Mex $1,564.00
Mex $6,181.68
Mex $ 1,881 .00 Mex $1,881.00