No hay artículos en el carro
No hay artículos en el carroPower Pro 47875 - Tornillos de retraso, 5/16 x 3 pulgadas, tornillos de retraso de construcción Star Drive, resistentes al óxido, bronce recubierto de cerámica, tina de 5 libras, 150 unidades
K_L
Comentado en los Estados Unidos el 23 de enero de 2025
Used on my 35 year old deck balusters which were nailed in and loose. Worked perfectly.
Robert Hopkins
Comentado en los Estados Unidos el 12 de agosto de 2023
Have used these many times and find them to be the best lag screws we've used. Would recommend and buy again (and have).
Douglas K. Morrill
Comentado en los Estados Unidos el 28 de mayo de 2022
I ordered these screws one late night right before my project was to begin when they came in my contractor looked at them and called them Cadillac screws they were nice screws they’re worth the money
TheHeater
Comentado en los Estados Unidos el 30 de octubre de 2020
I have used the Hillman fasteners on my deck rebuild project for the understructure and for fabricating new support in places as well as on 4x4 posts to fasten to the deck sides and other parts of this project. They do not strip. I drill pilot holes first. They also do not break. Do NOT use one of the cordless impact wrenches on these. We had a carpenter who used one of those impact wrenches to install regular old furniture fabrication screws and many broke off in the finished wood, causing me to have to drill them out and patch the wood surface to fix it. Just use a cordless driver on them, and pre-drill pilot holes, and you will have no issues with them. Excellent quality fasteners.
jason p
Comentado en los Estados Unidos el 25 de octubre de 2017
EDIT: reading a review where the head broke off... I have pushed these boys to the limit with my 900ft lb torque 1/2 drive drill that can take lug nuts off of a semi truck. and these screws can handle it. I use these screws to make anything and everything when i want overkill strength. the threads of one single screw can hold my pullup rope and has never budged. And ive used it for sistering ramps for a full size truck, and a 35' tower on structural shear strength necessary locations.Original: If you're looking for a screw that really has some grab on its threads for a short distance. This is my favorite screw to connect two two by boards. The only screw that's better for fastening two different to buy boards is the Head lok screws because the threads only go up the screw about an inch and a half and only grabbed one board. But those screws are not available in 5/16! I've driven these Hillman Group heads through treated pine over a half inch deep! And this is probably the best deal you can find even in the big box stores.
Productos recomendados
Mex $687.71
Mex $ 323 .00 Mex $323.00
Mex $396.58
Mex $ 206 .00 Mex $206.00
Mex $1,375.99
Mex $ 591 .00 Mex $591.00
Mex $1,000.01
Mex $ 550 .00 Mex $550.00
Mex $1,131.70
Mex $ 599 .00 Mex $599.00
Mex $369.63
Mex $ 177 .00 Mex $177.00