Really cool works great

I'm very pleased with this fan, especially for the price - I even would have been satisfied paying more for it (not that I want to lol)I used this as an exhaust fan on a small PC build. It's quiet and moves a good amount of air, I don't have any "metrics" to back that up but it's definitely sufficient to help cool my PC. The RGB is bright enough and looks good and the design is simple and looks nice. Build quality seems good too, better than I expected. The cables were long enough for me, but I could see them maybe being a little short on a full size ATX case depending on where your headers are at. The daisy chain RGB cables are nice, too.No complaints from me on this. My CPU air cooler and fans are all Thermalright and they've proven to be a great quality value brand, would buy again!

compré tres piezas y lo usé como sustituto de los ventiladores de mi tarjeta de video RTX 3070

I am using this fan as an exhaust fan in my case slots area below my GPU to help push the hot air of the GPU out of the system instead of letting it recirculate it's own hot exhaust as much.It isn't super loud at full speed, and I don't run it at full speed anyway, I have all the fans in the system set to be 'barely audible' at their highest setting which they only run at while gaming or rendering (the system is being upgraded for rendering as I go). The GPU in question is a Gigabyte Gaming OC RTX 4090, so it puts out a fair amount of heat despite only running in the 50-60C range on the core during heavy load because of the massive cooler on it.Packaging was a basic box, it comes with case screws and wire extensions, the fan itself has daisy-chain ability for both power & ARGB 5V.$8 may seem like a bit much for a single fan, but if you need a fan specifically this size, you know they don't come too cheap, and with the nice lighting this one has, in addition to the airflow it's capable of, and the daisy-chain power & ARGB cables, I think it's worth the cost.5 stars, Thermalright is a great option for those looking for case fans that don't want to spend a ton of money.

It's very quiet and cools well. Let's are bright, but not too bright.

TL;DR:Pros:1. Quiet even at the highest RPMs2. Premium quality with no wobble3. Compatible with iCUE and presumably other fan hubs/RGB controllers/RGB software suites4. Bright LEDs with excellent color accuracy5. 1PWM cable, 2 Male ARGB cables, 1 Female ARGB cableCons:1. Distracting front logo that can be covered; becomes less bothersome at higher RPMs2. LED diffusion isn't perfect regardless of selected color/effect but not a dealbreakerFull Review:A thorough review since this fan doesn't have any yet.For backstory, I bought a prebuilt ASUS G16CH a few months ago and it had a severe lack of RGB with the exception of the LED strips towards the front of the case. So I started the project of slowly swapping out the stock hardware inside the case not including the GPU and CPU. I settled on Corsair as my ecosystem and got to work. I replaced the stock top exhaust fan with a 240mm Elite Capellix AIO/Radiator, added a front intake fan to match the radiator fans (all AF120 RGB), replaced the stock RAM, and added two sets of LC100 tiles.The only thing that was left for me to swap out was plain black rear exhaust fan. Turns out the fan size was smaller than the standard 120mm or 140mm fan. After doing some research I discovered that most companies haven't bothered making 92mm RGB fans because they're not a common fan size, and finding one would be nearly impossible. On top of that, my motherboard has no RGB/ARGB headers so whatever fan I did find I would need to also work with my Corsair Commander Core.From what I can tell at the time I'm writing this review, there are only about 4 92mm RGB fans on Amazon, two of which are 4-pin RGB fans, not 3-pin ARGB fans. There are no 4-pin RGB to 3-pin Corsair LED hub adapter cables, so that would cut my options in half.And so I landed on this one. I'm not too familiar with Thermalright and I saw that this particular fan was relatively new, cheap, and had no reviews, so I decided to take a chance.I was more than pleasantly surprised. It's built solid, the fan blades and housing feel premium. It comes with 4 case fan screws. There is 1 PWM cable to connect to a compatible motherboard or fan hub (in my case, the Commander Core, which I can use to change the RPM), 2 male ARGB cables and 1 female ARGB cable (I used a 3-pin ARGB adapter to make it compatible with a Corsair Lighting Node Pro).This fan is quiet at the highest RPMs (running mine at 2,000 RPM), it doesn't wobble, and the LED lights inside are bright, pretty much on par with the Corsair fans in my case (AF120 RGB). While I'm not sure how many LEDs are in this fan, I added it as an 8-LED Series Fan in Corsair iCUE and all the effects work. The color accuracy when selecting colors in iCUE is perfect.All that said, this fan does have a few small downsides. The first being that the diffusion of the LEDs inside isn't great, which means you'll see the location of each LED, regardless of what color they are. It could also just be the fan I received and someone else might have better luck. For me personally it's not a dealbreaker and it's not too distracting so I'm satisfied. The second downside is that the logo on the front is a bit distracting especially at lower RPMs because it gives the effect that the fan is wobbling when it isn't, but this can be fixed by either covering it with a sticker or turning up the RPM which is what I did.Overall this satisfied my need for a 92mm RGB fan and considering the price it's a steal. This is a good start and I hope that we begin seeing more of them on the market as PC builds continue to become more compact.Pros:1. Quiet even at the highest RPMs2. Premium quality with no wobble3. Compatible with iCUE and presumably other fan hubs/RGB controllers/RGB software suites4. Bright LEDs with excellent color accuracy5. 1PWM cable, 2 Male ARGB cables, 1 Female ARGB cableCons:1. Distracting front logo that can be covered; becomes less bothersome at higher RPMs2. LED diffusion isn't perfect regardless of selected color/effect but not a dealbreaker