No hay artículos en el carro
No hay artículos en el carroTP-Link AC1200 Wireless Access Point
Andre De Neef
Revisado en Bélgica el 13 de noviembre de 2024
Het toestel werkt perfekt, met een goede dekking van het volledige huis.
Imran
Comentado en Arabia Saudita el 4 de octubre de 2023
Excellent performance, Nice design and good quality.
R. Leaf
Comentado en los Estados Unidos el 9 de septiembre de 2021
TL;dr -- this AP is another case of good hardware, awful firmware. The OEM firmware makes this device unusable, but flashing OpenWRT makes it useful again.Full Review:I bought this access point to use as a wireless client bridge for a computer in my house that gets an extremely poor wireless signal. Initially, I was disappointed because I was limited to a 2.4GHz connection, as the 5GHz connection was too unstable to be used. I'd regularly run into issues watching YouTube videos, browsing the web, or making Zoom calls.The solution was to use the 2.4GHz radio instead. This meant that my connection was limited to ~45-60mbps, which pales in comparison to a typical 5GHz connection speed of ~250-300mbps. For reference, my iPhone 11 is able to pull ~560-620mbps when placed next to the hardwired access point.i initially considered returning the AP, but then I found someone online had ported OpenWRT to this access point. Although this may void the warranty, it solved my issue. No longer do I have stability issues with the 5GHz radio, which means that I have both a reliable and fast connection to the Internet again my home office.OpenWRT is great, although it's far more complicated of an interface than the default TP-Link one. I would not recommend using this device in this configuration unless you're familiar with more advanced networking concepts or are willing to learn.Pros:- Inexpensive- Supports wireless client bridge mode.- Supports PoE using the provided injector. This is extremely beneficial to my setup, since I can place the AP where I best receive a signal, even though I don't have a power outlet nearby.- The Qualcomm Atheros QCA9886 802.11acn wireless radio has excellent performance- Gigabit LAN port (to the reviewer claiming it doesn't have one, this is simply not the case; there's no way I'd be able to pull 300mbps if it had a 10/100 interface).- The default firmware supports bridge mode with DHCP & NAT disabled, which means that every device connected through this AP has its real Ethernet MAC address exposed. If you plan to use this on a college campus or want your connected device(s) to be bridged to the parent network, this is very useful. If you use this mode, you can still control the AP's settings using the assign IP address for the access point itself.Cons:- Default firmware means that the 5GHz radio is unstable. I also had problems with controlling the LEDs and updating settings.Bonus Pro-tip:I only used this device with one computer, but you could easily use an Ethernet switch with the single port on the back of this device to connect multiple computers/devices.
Afsal Azeez
Excellent WiFi coverage with 4 antennas. I was facing issue for not getting signal after a wall. This AP solves the problem. Ordering again today.
Syam
very good item
Productos recomendados