No hay artículos en el carro
No hay artículos en el carroLos conjuntos de ventiladores de refrigeración TYC están diseñados para ser equivalentes a OE en rendimiento, validado a través de pruebas de volumen de aire que simula la capacidad de refrigeración. Cada unidad es un conjunto completo con motor, ventilador y cubierta para simplificar el reemplazo. Para garantizar la durabilidad, cada diseño de ventilador de refrigeración se realiza a través de una serie de pruebas, incluyendo resistencia, torsión y resistencia a la vibración, la humedad y la corrosión. Además, cada unidad se somete a una prueba de encendido antes de salir de fábrica para garantizar la funcionalidad.
$hopper
Comentado en los Estados Unidos el 10 de abril de 2025
Fit and works greatGood quality
Trebor
Comentado en México el 13 de noviembre de 2024
Good value.
Mr Smith
Comentado en Canadá el 7 de julio de 2023
Working great so far
benito guerrero
Comentado en México el 24 de junio de 2023
Quedó perfecto
eric zamarripa
Comentado en México el 9 de noviembre de 2023
Buen producto está funcionando sin problemas llegó antes de tiempo
Néstor G.
Comentado en México el 5 de julio de 2022
se ven de buena calidad esperemos duren funcionando
SweetNiffer
Comentado en Canadá el 26 de junio de 2019
Great price for this assembly. Saved a lot of money buying online, as opposed to getting the dealer to buy the parts. Accurate description of the item. Got exactly what I needed, and my truck stopped overheating. AND I got my a/c back! Whooooo!!! Just in time for the random 21-34 degree weather here in Canada, hahaha
Monica Jordan
Comentado en los Estados Unidos el 8 de noviembre de 2018
2004 Ford SUV Edge was over heating (took very long to overheat-25+ minutes) and AC wasn’t working. Slid right into place with about 6 bolts removed. There a good video that show how to remove it by sliding it to the driver side, under the upper radiator hose. Was very easy, as the video said, there was little forcing it into place. But, was much easier than having to drain the system and remove hoses and refill. Went very well. The fans are strong and keep the everything VERY cool. AC is colder than ever. The radiator bolt pattern DID match up with the original bolt pattern. NO drilling and NO special wiring needed, “plug and play”. Wiring harness matched right up. Easy.As for photo, it looks like it does in the product photo. Although, it’s upside down in this picture... The fan converter box goes on the top (drivers side of the engine compartment).
Francis Wright III
Comentado en los Estados Unidos el 5 de julio de 2016
I have a 2008 Ford Edge with tow package with almost 180k miles. The A/C suddenly quit blowing cold at idle but worked as long as the car was moving. I checked the fans and the driver's side fan was not working. Ordered this replacement on a Sunday and it arrived on Thursday. The assembly looks very nicely made and very similar to the OEM part. It was well packaged with expandable foam blocks to insulate it in its box. I watched several YouTube videos on how to do the swap and am more convinced than ever that YouTube is populated by morons and imbeciles. The clips ranged from a few minutes to almost 30 minutes but can all be summed up as "remove old part, install new part". That's exactly how "helpful" they are! So since there's an absence of info on this I'll share some tips on what I learned:- There are two 8mm bolts that hold the assembly in, one on each side. Remove the air box and air box bracket to get to the one on the driver's side.- The fan assembly can be swapped without removing the radiator hose. Take a couple of straps and use them to pull the hose and wiring harness as far from the radiator as possible (after unsnapping the wiring harness connectors from the fan assembly).- My model has something no one mentioned anywhere- the bottom radiator hose is clamped to the bottom of the fan assembly. It's an 8mm bolt, remove it before trying to pull the fan assembly.- You don't need to disconnect the connectors from the fans to the controller, only the one from the main wiring harness to the controller. It's on the driver's side. There is a tab on it, depress the tab and pull on the connector to remove.- The fan assembly is a very tight fit. I had to pull it towards the driver's side and then rotate it 90 degrees to get it out of the car. Be careful not to damage the fins on the radiator with the corners of the fan assembly. It took a lot of persuasion to get it out.- To install the new fan assembly I did the same thing- rotated it 90 degrees to drop it in and then rotated it back as I worked it into place.- Reinstall everything in reverse order, don't forget to bolt that lower radiator hose bracket back on!I hope that helps! I didn't time it but I think it took me around 45 minutes. I've been driving the Edge a week since the replacement and so far so good! The fans seem as quiet to me as OEM and perform just as good.I will try to remember to follow up in a few months.08-08-16 update- a little over a month and a couple thousand miles later and it's still working great!
Productos recomendados
Mex $1,429.18
Mex $ 614 .00 Mex $614.00
Mex $692.88
Mex $ 318 .00 Mex $318.00
Mex $487.49
Mex $ 263 .00 Mex $263.00
Mex $1,149.00
Mex $ 540 .00 Mex $540.00
Mex $2,148.00
Mex $ 880 .00 Mex $880.00