No hay artículos en el carro
No hay artículos en el carroRip Torn
Comentado en los Estados Unidos el 5 de marzo de 2025
Perfect match for my 2002 4runner. Mine's the Limited, but the other 3rd gen 4Runner trims would match too. One 20' roll did the entire driver's door and 3/4 of the passenger door. Be sure to undo the floor strip and the one low dash trim piece. It takes a 10mm socket and the panel takes phillips. You'll also want to pop your column trim between front and back doors, but that just pops off with a good tug. The factory seals have no seam.Put your seam toward the lower front where it's less noticeable. When I did mine, holding the new trim out in front of where I was working seemed logical--but holding it so the new trim is nearly perpindicular/90* actually had the smoothest and quickest result.Good luck!
Chad Hicks
Comentado en los Estados Unidos el 5 de marzo de 2025
Had to trim to fit but it works great
Michelle Mcglashing
Comentado en los Estados Unidos el 20 de marzo de 2025
Fits good on my car it's good material it was Worth the money I spent on it
Customer
Comentado en los Estados Unidos el 14 de marzo de 2025
Doesn’t go on easy still blows air in through the seal not made for the 2006 gmc sierra 1500 crew cab front side or passenger would not recommend buying at all go the OEM route I’m out close to 20 bucks I couldn’t order the passenger side OEM model but was able to order the front drivers side OEM off of Amazon definitely buy the OEM GM kit door seal off a auto website will sound a lot better and hold in the pressure in the cab
mom max
Comentado en los Estados Unidos el 2 de abril de 2025
Worked perfectly.
eugenio mosqueda
Comentado en México el 9 de diciembre de 2023
Fácil de colocar y es de un residente y buen material.
Productos recomendados