Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Walfront Micro Inversor 700W Microinversor de Conexión a Red Solar IP65 Control WiFi Autoenfriamiento 120 / 230V Identificación Automática Inversores de Potencia

Envío gratis en pedidos superiores a Mex $600.00

Mex $3,298.00

Mex $ 1,517 .00 Mex $1,517.00

En stock

Acerca de este artículo

  • Función: el microinversor puede lograr un seguimiento del punto de máxima potencia, lo que maximiza potencia de salida total. Medidor de alta precisión integrado, puede ver el estado de funcionamiento de cada componente.
  • Función: el microinversor puede lograr un seguimiento del punto de máxima potencia, lo que maximiza potencia de salida total. Medidor de alta precisión integrado, puede ver el estado de funcionamiento de cada componente.
  • Seguro de usar: el microinversor puede controlar independientemente cada componente en paralelo, minimizando los posibles riesgos de seguridad.
  • Voltaje de salida CA: 120V / 230V (identificación automática). Potencia de salida nominal: 700 W. Rango de temperatura de funcionamiento: -40 ℃ - + 65 ℃. Clasificación impermeable: IP65 NEMA3R. Método de enfriamiento: autoenfriamiento. Rango de frecuencia nominal: 48-51Hz / 58-61Hz.
  • Operación y monitoreo convenientes: se puede operar y monitorear a través de WiFi o una aplicación móvil, lo que puede mejorar en gran medida eficiencia general. de monitoreo: aplicación móvil. El micro inversor se puede instalar directamente detrás del módulo o en el soporte, que es fácil de mantener.



Descripción del producto

Solar Grid Tie Inverter
Solar Grid Tie Inverter
Solar Grid Tie Inverter
700W Micro Inverter
700W Micro Inverter


Características


El microinversor puede controlar de forma cada componente en paralelo, minimizando posibles riesgos de seguridad.


Medidor integrado de alta precisión, puede ver el estado de funcionamiento de cada componente.


El micro inversor puede lograr un seguimiento del punto de máxima potencia, lo que maximiza la potencia de salida general.


Puede operarse y monitorearse a través de WiFi o aplicación móvil , lo que puede mejorar en gran medida la eficiencia general.


El microinversor se puede instalar directamente detrás del módulo o en el soporte, lo cual es fácil de mantener.


Especificación


Tipo de artículo: Inversor


Modelo: WVC-700R3-433/WiFi


Potencia de salida nominal: 700 W


Temperatura de funcionamiento Rango: -20 ℃ a +50 ℃


de monitoreo: aplicación móvil


Clasificación de impermeabilidad: IP65 NEMA3R


Método de enfriamiento: autoenfriamiento


Rango de frecuencia nominal: 48-51 Hz/58-61 Hz


Cómo utilizar


Paso 1: instale el inversor en el soporte del fotovoltaico panel con los tornillos proporcionados con la máquina, como se muestra en la siguiente figura:


Paso 4: Conecte el cable de salida de CA al cable principal de CA;


Paso 5: Repita los pasos 1 a 3, instale y conecte todos los inversores;


Paso 6: conecte el cable principal de CA a la red pública para comenzar su viaje hacia la energía verde.


Cómo utilizar


Cuando el inversor no se pueda conectar normalmente a la aplicación del teléfono móvil, verifique los siguientes elementos:


1. El enrutador WiFi debe configurar una frecuencia de 2,4 GHz.


2. La señal WiFi debe ser buena (se recomienda colocar el router al lado del inversor y luego se toma el vídeo).


3. Utilice mejores teléfonos móviles, para iOS 11, 12, 13, S8, 9, 10 y otros teléfonos inteligentes nuevos.


4. Bluetooth debe estar activado.


Lista de paquetes


1 x inversor


1 x manual de usuario


1 x línea de conexión de CA


2 x Tuerca de fijación


2 x Junta fija


2 x Arandela fija


Nota


Antes de instalar los productos de microinversores de la serie WVC, lea este manual y preste atención a los detalles de instalación.


Este manual contiene instrucciones importantes que se deben seguir al instalar y mantenimientoReduzca el riesgo de descarga eléctrica y garantice una instalación y operación seguras de los microinversores Kaideng. Siga siempre los siguientes símbolos de seguridad presentes en este documento para indicar condiciones peligrosas e instrucciones de seguridad importantes.


Tenga en cuenta que el tipo antiguo y nuevo de el producto se enviará al azar y asegúrese de que no le importe antes de realizar el pedido.


El funcionamiento del producto se ve afectado por la intensidad de la luz solar, cuando la luz solar es débil y no puede alcanzar el voltaje. Por encima de 22 V, el producto parpadeará con una luz roja y entrará en el estado de no funcionamiento, la aplicación no puede recibir los datos de monitoreo, esta situación debe intentar reiniciar la operación en la aplicación a intervalos, y si el voltaje de arranque es superior a 22 V. Después de un período de tiempo, el producto podrá reiniciarse y entrar en estado de funcionamiento.


s. seib
Comentado en Canadá el 6 de julio de 2024
hooked it up. didn't work. tried trouble shooting, still didn't work. Waste of money.
Daniel C.
Comentado en México el 7 de mayo de 2024
Solamente sirvió por 3 meses y dejo de funcionar no lo compren no vale la pena
K K
Comentado en los Estados Unidos el 21 de agosto de 2023
3rd one overheated. I added active cooling which helped allot. But it's still dead in less than 30daysDoesn't come with cable to tie in. So had to cut and crimp incuxed single cable. Software link is very flaky and barely works.First unit was DOA, 2nd lasted 6 days before heating up to 60c in overcast northeast. Then it only saw 240 volt grid when it was obviously on a 120v line.Will not give it a 3rd chance. Absolutely no custoer support at all. Return to Amazon while you have a chance. Can't imagine these are built to last past the 30 day warranty
Martha Wankan Darnell
Comentado en los Estados Unidos el 24 de julio de 2023
After returning 2 inverters from Goldwater. They have stopped working.
Randrew Thomas
Comentado en los Estados Unidos el 23 de agosto de 2022
Product: WVC-700Lite (WiFi).My best apparent efficiency so far was about %75 of panel rating measured on a nearly clear day, Aug 22, 2022. This was with 4 x 100W NewPowa brand panels, 2 panels in series in 2 strings, one string each on the 2 string connections provided on the inverter.Measurements for above conditions: PV Input: 25.9VDC, 12.04A, 312W. Inverter Output: 126.9VAC, 2.23A, 284W.NOTE: it is industry practice to "de-rate" microinverters when applying them to a project. That means they provide more PV solar panel than the max rating of the inverter by up to 133%. Example: if a solar installer were to quote me a setup completely utilizing this 700W inverter, they would specify using about 900W worth of solar panels connected to it. This is for a variety of reasons, but include: the sun rarely provides YOU the standard 1000W/sq meter that PV panels are rated at. Solar panels work less efficiently when hot (in the full sun). And so on.In my setup, sun tracking (ie, aiming the panels straight at the sun) proved very important to performance. However sun tracking systems are almost never financially viable, if even possible for your installation.Other info:- Pairing (getting the inverter online to the Internet):-- PV panels MUST be connected and generating at least enough power to power the inverter.-- You must use the "Cloud Intelligence" app to initially pair to the inverter and later to monitor it.-- In the app main screen, tap the "+" icon in the upper right. Then tap "Add Manually" in the lower left of the "Auto Discover" screen. In the "Add Manually" screen, tap the "[-]" icon in the upper left, then scan the QR code in the instruction pamphlet or on the inverter (it's in both places).-- Then follow the pamphlet and on-screen instructions to get the inverter into the pairing mode (LED blinks rapidly)
Matthew Ferro
Comentado en los Estados Unidos el 21 de agosto de 2022
The device was only configurable by smart phone. On top of that the software is very hard to find in both the google play and apple app stores. Then the setup kept failing on my iPhone 12 pro max. I had to get out on of my older android phones just to get it to connect to this device.Device easily went past the 50*c rating on the instructions. I used my thermal imaging camera to see how hot this thing got on the outside when outputting 500w; the temp went up to 151*F or 61.111*C. It was so hot I almost burned myself.Because it was getting so hot I kept it inside connected to my panels where I have the ac on. So it was hitting 151*F with it 72* in the room. Hate to think what would happen if I left it outside in 90-100*F heat like it was supposed to do.This morning was the first test run after setting up yesterday and the device failed with in one hour.I wish amazon would attempt to do quality control on the products it sells to it's customers.Added on 08-24-2022:The replacement one arrived. I plugged it in today set it up with the software and only ran for a total of 5 minutes. Just stopped working. I even had a high powered fan on it to help keep it cool inside the house with it being 72*F because the prior one overheated.2 out of 2 failures is pretty bad..
Productos recomendados

Mex $7,658.74

Mex $ 1,881 .00 Mex $1,881.00

4.6
Elegir