Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

WINMAX TOOLS AUTOMOTIVE - Compresor de resorte helicoidal de 280 mm, capacidad de mordazas: 23 ~ 280 m de alta seguridad

Envío gratis en pedidos superiores a Mex $600.00

Mex $897.66

Mex $ 412 .00 Mex $412.00

En stock
  • Capacidad de mandíbulas: 23 m/m ~ 280 m/m Longitud 280 mm 1200 kg máx. capacidad por par. Hecho de material duradero para mayor resistencia
  • Resorte de enganche de gancho que se puede comprimir girando la tuerca hexagonal. Utiliza llave o llave hexagonal de 19 mm
  • Cuenta con protección ajustable que evita la liberación accidental del resorte bajo carga y también permite que las partes de la herramienta utilizada para quitar siempre funcionen en paralelo
  • No necesita instalación y extracción sistemática adicional de la mandíbula
  • Compresor de resorte helicoidal de alta seguridad con capacidad máxima de 1200 kg por par



Descripción del producto

Opiniones de los clientes
4.1 de 5 estrellas 38
3.9 de 5 estrellas 127
Vehículo específico Todo Todo Todo

Sheena A.
Comentado en los Estados Unidos el 29 de marzo de 2025
For UTV and ATV springs, this tool works great!
Kindle Customer
Comentado en los Estados Unidos el 21 de mayo de 2024
Worked great, easy to use, great quality, and prompt shipping!
Robert Walker
Comentado en los Estados Unidos el 8 de octubre de 2024
Needed a spring compressor to work on a motorcycle rear spring. Worked great. Good quality. Seems heavy duty.
Dirk Diggler
Comentado en los Estados Unidos el 18 de mayo de 2022
I love these! Wayyy easier to use than one you rent from a parts house! I rented a set, it took a LONG time to get my coil spring to compress and when I finally installed the upper mount, there wasn't enough space between the coils to remove it! I saw and purchased these because I saw the jaws were slim enough to fit.I was finally able to remove the crappy parts house rented ones; I used these on the other side from the start-man, they were soo easy to compress and install the upper mount. What took me the better part of a WHOLE DAY messing with loaner tools, I was able to do in minutes!
Marie A.
Comentado en los Estados Unidos el 24 de febrero de 2021
These are very heavy duty, and they worked great for compressing springs on a couple different motorcycle shocks; an '03 1200 Suzuki Bandit and a '07 Hayabusa. These springs have very little room between the coils for clamps to get into, but this tool did the job. I wrapped the contact points on the springs with electrical tape, and they didn't cause any marring of the finish on new springs.They are a little ungainly to work with if you don't have anything holding the shock itself, it's helpful to have two people to get them into place and hold them there until there is tension on the spring. There isn't much distance between the body of the tool and the clamps either, you have to be mindful the tool doesn't rub your shock/spring.With care and patience they work great, they easily stand up to the spring load and the fine thread of the adjusters makes it easy to turn them in small increments. I don't foresee ever needing any other spring compressor tool again.
Productos recomendados

Mex $31,439.16

Mex $ 1,881 .00 Mex $1,881.00

4.7
Elegir

Mex $281.00

Mex $ 143 .00 Mex $143.00

4.6
Elegir

Mex $329.00

Mex $ 177 .00 Mex $177.00

4.9
Elegir