No hay artículos en el carro
No hay artículos en el carro Descripción:
Aplicar condiciones ambientales
Rango de temperatura de almacenamiento: -30 ℃ ~ 80 ℃.
Rango de temperatura de funcionamiento: -15℃~70℃.
Rango de voltaje de funcionamiento: 4.8-6.8 V.
Especificaciones mecánicas
Tamaño: 40 x 20 x 40 mm.
Peso: 60 g.
Relación de engranaje: 342
Rodamiento: doble rodamiento
Cable conector: 300 ± 5 mm.
Motor: 3 polos
Especificaciones eléctricas
Corriente de ralentí (en detenido): (4 mA a 5 V) / (5 mA a 6,8 V)
Velocidad de funcionamiento (sin carga): ( 0,2 seg/60 ° @5 V) / ( 0,17 seg/60 ° @6,8 V)
Par de parada (en bloqueo): (21,5 kg·cm@5 V) / (25 kg·cm@6,8 V)
Corriente de parada (en bloqueo): ( 1.6A @5V ) / ( 2.5A @6.8V )
Especificaciones de control
Sistema de control: PWM (modificación de ancho de pulso).
Rango de ancho de pulso: 500 ~ 2500 μseg.
Posición neutra: 1500μseg.
Grado de funcionamiento: 180° o 270° (cuando 500~2500μseg).
Ancho de banda muerta: 3μseg.
Frecuencia de operación: 50-330Hz
Dirección de rotación: en sentido contrario (cuando 500 ~ 2500 μseg).
William J.
Comentado en los Estados Unidos el 9 de enero de 2025
after I put it together it works great. it has lots of parts and NO directions
Client d'
Comentado en Francia el 24 de enero de 2025
Bon produit , mais je vous invite à l’acheter sur AliExpress , beaucoup moins cher . Le vendeur nous prend un peu pour des vaches à lait au vue du prix proposé sur ce site
N and V ❤️
Comentado en los Estados Unidos el 20 de diciembre de 2024
Works great with Arduino projects and is strong enough to pinch fingers, so be careful. The mounting holes make it easy to attach multiple motors together or mount to a larger project. Currently using a few of these motors to create a robotic arm.
A.A
Comentado en Canadá el 26 de noviembre de 2024
Seems very high quality made doesn't seem cheap or delicate. One major flaw I added photos to try and demonstrate, is that the wire comes out of the servo on the side that has the moving bracket. So the mounting bracket is on the opposite side of the wire. The moving bracket side, has the wire, which gets in the way of the moving bracket. However as I tried to show in the photo this is easily solved by pulling the wire down, however, I can see that causing stress on the wire possibly you could damage the wire this way. Also if your motor was to swing to far, as shown, it could pinch the wire between the box of the servo and the moving bracket. Ideally, they could have ran the wire out the mounting side as this is more logical for having the wire out of the way of a moving part, no tension would of been placed on the wire, and depending on what you mount to, you could of drilled a whole into your project and ran the wire down through it avoiding any pinching. Other than that one huge design flaw, it seems very sturdy and good quality material. I'll be returning mine only because of the wire, if your able to over come and over look this, it's a great motor.
Patrick C.
Comentado en los Estados Unidos el 28 de abril de 2024
I'm glad I finally bought a product that works as described, perfect
Productos recomendados
Mex $4,378.99
Mex $ 1,839 .00 Mex $1,839.00