No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Para la mejor colocación de subwoofer sin limitarse
Le da la capacidad de colocar subwoofer en esquinas lejanas, menos desordenado y mejor ubicación de sonido en la habitación, todo lo que necesita es configurar el subwoofer en su ubicación prevista con la toma de corriente cerca del subwoofer y usted ` está listo para disfrutar de los graves de forma inalámbrica.
Funcionalidad Plug & Play
El transmisor de audio inalámbrico y el receptor se habían emparejado antes del envío, el transmisor de arranque de subwoofer inalámbrico WSA-5TR-V2 encuentra el receptor automáticamente una vez que lo conectas y lo enciendes la primera vez.
5,2 y 5,8 GHz de doble banda seleccionable
Viene con la última banda dual como conexión inalámbrica de 5.2/5.8GHz con total de 62 canales de selección automática del canal RF 5727~5848 (LED de color azul con modo 5.8G) y 44 canales RF 5157~ 5243 (LED de color verde con modo 5.2G), para evitar y disminuir la posibilidad de interferencia de las redes inalámbricas. routers, teléfono celular, garaje puertas, R/C y otros dispositivos de red WiFi 2.4G/5G.
Especificaciones:
- Frecuencia del transmisor: Banda dual de 5,2 / 5,8 GHz
- Respuesta de frecuencia: 10 Hz ~ 23 kHz
- Relación señal/ruido: >80dB
- Nivel de salida de audio: 2 V
- Distorsión armónica total: tipo. -90 dB
- Nivel de voltaje de entrada del transmisor: 0,7 Vrms
- Nivel de voltaje de salida del receptor: 0,7 Vrms
- - Dimensiones (transmisor y receptor): 66 mm x 59 mm x 29 mm
Características:
- Transmisión de audio: Digital/Sin comprimir
- Frecuencia de radio de modo 5.8G: Canal RF 5727~5848
- Frecuencia de radio de modo 5.2G: Canal de RF 5157 ~ 5243
- Rango de funcionamiento del transmisor:
Max 100 pies - línea de visión (mejor resultado) Max. 15 m - a través de paredes y techos secos (no recomendado)
- Máx. Número de receptores por transmisor: 4
- Velocidad de datos transmitidos: 5 Mbps
- Separación de canales: tipo. 90 dB
Contenido del paquete:
- Transmisor de audio inalámbrico WSA-5T-V2 x 1
- 1 receptor de audio inalámbrico WSA-5R-V2
-2 adaptadores de alimentación USB DAC de 5 V
- 2 cables de audio RCA estéreo
- 1 cable de audio estéreo RCA a mini jack
- 2 cables USB
- 1 manual de instrucciones (idioma español no garantizado)
Aplicación de instalación WSA-5TR
Conectar con subwoofer alimentado
Con este kit de subwoofer WSA-5TR-V2, es más fácil que nunca colocar tu subwoofer en el lugar correcto. Puedes reubicar el submarino a cualquier lugar donde haya una toma eléctrica mediante transmisión de audio inalámbrica.
Conectar con altavoces activos/alimentados
Para los usuarios que desean agregar capacidad de zona estéreo a una instalación de A/V existente, el kit de altavoces inalámbricos WSA-5TR amplía las opciones y usos de su sistema de audio principal, conectándose a los altavoces alimentados a su patio, área de la piscina o cualquier lugar donde quiera disfrutar de la música lejos de su sistema A/V principal.
Conectar con altavoces pasivos para estanterías
WSA-5TR-V2 NO funciona con altavoces pasivos de estantería a menos que el receptor inalámbrico se haya conectado con un amplificador estéreo local adicional para alimentar los altavoces pasivos.
colin
Comentado en Canadá el 17 de marzo de 2025
Worked straight out of the box. Haven't had any connection or noise issues in almost a year of daily use.
Mike
Comentado en los Estados Unidos el 9 de febrero de 2025
I've only had this for 2 days now, but this is amazing. I am using this for a 3rd subwoofer (The other 2 subwoofers are hard wired) I have on my Home Theater system and it works great. No latency to speak of. No sound issues. I am very impressed. Volume level and everything is about the same as when I had the subwoofer hard wired. I did re-calibrate my speakers to make sure all level were good between the 3 subwoofers, but that is expected. There are only 2 gripes I have; but they are minor and don't take away from the product.1st: It would be better if they labeled TRANSMITTER and RECEIVER better on the units. When I first installed it, I accidentally put the receiver unit at my audio unit and the transmitter unit at the subwoofer. That obviously doesn't work having it backwards. I guess I was a little too excited and didn't read more carefully which unit said transmitter and which said receiver.2nd: No where in the instructions does it say how to CHANGE the frequency from 5.8 ghz to 5.2 ghz. I have a very intensive wifi network and I did notice a small amount of interference with my network. It was small, but noticeable. No where could I find a switch or setting to change the units to 5.2 ghz. By default it connects on 5.8 ghz. And it pretty much auto connects out of the box, so I didn't have to do anything. But after a lot of research from people reviewing this item, I discovered that if you press AND HOLD the "Pair" button on the receiver unit, it will start blinking and then start blinking GREEN (Meaning 5.2 ghz). Then I press and held the "Pair" button on the transmitter and it too changed to GREEN (Meaning 5.2 ghz). So all is good now. I just wish they had this information in the instructions. I tested powering down the unit and when the power was restored, it stayed "GREEN" 5.2 ghz.So all in all, this is an excellent unit. My research shows that "internally" this unit is the exact same as the KEF KW1 wireless unit. Could be the 2 companies working together or getting it made from the same manufacturer. Either way, this unit works great; great price; lowest latency of all I have checked on.I should point out again, that I have only used this for a subwoofer. Technically it will work on ANY SPEAKER as long as it is a POWERED SPEAKER. So technically, you should be able to use it for surrounds or rears if you can't get wire there. But I can't comment on how good it will be. Specs say no problem with frequency response; but again I only use it for a subwoofer. I highly recommend it. If I run into any problems with this unit, I will definitely add a change to my review.
Customer
Comentado en el Reino Unido el 25 de febrero de 2024
One of the worst audio purchases I've ever made, I bought this to replace my SVS sound path single band wireless. The SVS works well but there were very occasional cut outs. I thought this one would be more reliable as it's two band. What I have experienced is non stop drop outs whatever band I use, and worse than that lots of clicks and pops which made us think someone was upstairs... What is more the phono sockets are the flimsiest I've ever encountered, when plugging a phono/RCA lead in it feels like the socket is about to break off. What a waste of money, feel ripped off and it's now past the return date by just a few days.
Chris H
Comentado en Canadá el 16 de enero de 2023
I have a Denon multizone receiver in the basement and wanted to play the same music through the other receiver on the main floor for seamless sound. I read a ton of reviews on various transmitters and they all seemed quirky in one way or another except this one, so took a chance and bought it. No regrets at all. The signal has to travel through an insulated 10' ceiling and laterally about 30'. No dropouts, static, pops, or extraneous noises of any kind. Just clean music as good as the original source and no audible latency at all when I stood between the two zones. Worth every penny.
Lim Ray
Comentado en Singapur el 22 de octubre de 2021
Good product. No delays in sound delivery. When I first set this up no sound could be heard. then I realised that there is a transmitter and a receiver. So be sure not to connect the transmitter to the subwoofer instead as they look identical.
Productos recomendados
Mex $5,699.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $3,245.00
Mex $ 1,395 .00 Mex $1,395.00
Mex $16,500.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,799.00
Mex $ 1,119 .00 Mex $1,119.00
Mex $22,900.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $7,166.41
Mex $ 1,881 .00 Mex $1,881.00