No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Apertura grande
Tamaño de apertura: 5.3 x 2.95 pulgadas. La apertura grande no interfiere con la expulsión de la caja de latón gastado.
Colector universal de latón
Se monta en cualquier rifle de cargador extensible con una parte superior plana o protector de mano de riel Picatinny. Compatible con la mayoría de los modelos AR
Montaje rápido desmontable
El colector de latón XAegis se instala o quita fácilmente sin necesidad de quitar el accesorio del riel.
El paquete incluye:
1 colector de latón Net2 soportes de riel Pic 2 llaves
Josh
Comentado en los Estados Unidos el 23 de febrero de 2021
So far great! Just used it the other day and worked great, such an improvement over the cheap ones you Velcro to the handguard. Was easy to install fit in between my scope rings and adjusts easy. My only complaint and I contacted the manufacturer so hopefully I'll get it resolved, but mine only came with one picatinny rail mount. Was the whole reason I paid an extra 6-7 bucks was for the extra one. Was already Wondering how to buy more of the mounts so I had more than two and it didn't even come with two.
john w.
Comentado en los Estados Unidos el 9 de agosto de 2020
Now that I have your attention, I give it 5 stars for what it is, nice quality, easy to assemble, and seems well built, as well built as the "C" brand one from China as well, and a good value coming with 2 mounts, as well as a positive locking system.Now the downside, and it's not terrible, but could be a deal breaker for some...The mounting system, while rock solid, is also about double in thickness as the "C" brand at the rail, so when you mount it on your rail with an optic, you may not have enough clearance to make it work. It uses a manual button operated lock tab setup, unlike the "C" which uses a ball bearing that lightly touches holes in the rail mount piece, this locks much more solid, but at the cost of being quite thick.I have mine on a Ruger AR556 with a Bushnell 1x4 AR223 optic, and with the cantilever mount, i had to mount it to the rear, the basket bracket is generous enough in length to allow a rear mounting position, but because of the eyepiece diameter, i can only hit the first "click" and the basket winds up about 2+ inches away from the ejection port. However, running my first 60 rounds out, only a couple of shells failed to land in the basket, just falling next to the firearm on the bench, as the opening in the basket seems decent sized.I experienced no problem with the material of the basket "melting", in fact I had 0 shell stickage, in comparison to my "C" brand, which does have some hot case sticking from time to time.Overall, I will stick with the 5 stars, and would likely buy again, just bear in mind if you run a scope, you might not get a fit, unless your tube sits really high (over a solid 1/2" of clearance above the rail)Oh, and a tip, just like the "C" brand, to prevent the basket from drifting back and forth on the rail, use loctite purple on the screws vs, overtightening them, the mounts are good quality, but those little screws do not take gorilla torque any better than anyones else's, the clamp works, but the screws on any of these type of baskets can work loose from vibration over time allowing them to drift, but purple is low torque and works well for most screws of this size, and allows you to loosen them to move the basket position if need be...
BearCub
Comentado en los Estados Unidos el 22 de noviembre de 2020
I used to use the Caldwell velcro-on brass catcher. Over time that one tends to change shape and sag and I tend to have issues with brass not fully ejecting when using that one. So I needed a brass catcher that was center mounted and while searching through Amazon I spotted this one. Yes it costs twice as much but this is what you getPROS:(1) a CENTER-mounted brass catcher that doesn't flex downward or bend or what have you(2) a large mouth with a small bag and a rigid frame, perfectly sized and a big improvement over the velcro product(3) ADJUSTABLE position so you can move the basket forward or backward depending on the gun, your optic, the ejection port, etc.,(4) TWO mounting plates so the net can be swapped easily between systems as needed without having to wrench it off and on every time, (5) more mounting plates available online for $9.99 of which I ended up buying two more.(5) It works flawlessly and does not interfere with operation.CONS:(1) Yeah its costs more than other solutions(2) If you have a large optic mount you may have issues getting the net in the right spot(3) The mounts are made to be low profile but they're still not low enough to clear a scope tube, the adjusting ring, or the objective bell. I have a very large scope and it sits high on an A3 flat top receiver so I can get the mount to notch on the first setting (furthest out). This actually works just fine even though it leaves a pretty good gap between the net and the ejection port. Still this also makes this less flexible than the cheaper one. Lucky for me I was able to make it work. I also tend to carry both this one and the cheap one in my range bag in case this won't work on the system I'm using.Conclusion - Yeah, I was wary because the Caldwell model has served me relatively well for years, but having made the jump, this is a significant improvement. If you don't have any issues in terms of optics mounting, you will appreciate how convenient this catcher is, and even more so if you're a reloader. I would without a doubt purchase this again, twice, on Sunday, in the snow, uphill, both ways. If you collect/police your brass, this is one of the new essentials.
Anthony T. Wilkinson
Comentado en los Estados Unidos el 21 de enero de 2020
This brass catcher work very well, easy to install, build quality is good, and light weight. it is also adjustable front to rear to the tune of three or more inches. It comes with two adaptors for mounting to two different rails. You can buy extra adaptors for $9.99 each. This way when switching from one platform to another its just a simple matter of pushing in a spring loaded tab and sliding off of the rail and when switching back the adaptor is already in the correct position, just snap and boom, off you go! Question is : Why did I wait this long to buy one, this is a great money saving investment that works. I have lost many pieces of brass in the grass that I later found after the lawn mower chewed it up good and proper. I highly recommend getting yourself one.
Kerry Leslie
Comentado en los Estados Unidos el 10 de septiembre de 2020
Nice, well made bracket and mounting system at a reasonable price. The second rail mount is particularly nice to have. The only issue noted so far is the time/trouble involved with making adjustments to the mesh bag on the frame.In order to make small adjustments to align the bag with the ejection port you must first remove the mesh cover from the frame to gain access to the adjustment screws. The inclusion of a second mounting bracket is a great feature but it is somewhat diminished by having to remove the mesh cover every time the bag must be adjusted for a second rifle. This is an inconvenience not found with other brass catchers I’ve seen.
Productos recomendados
Mex $2,066.45
Mex $ 950 .00 Mex $950.00
Mex $634.00
Mex $ 317 .00 Mex $317.00
Mex $1,985.14
Mex $ 913 .00 Mex $913.00
Mex $216.09
Mex $ 108 .00 Mex $108.00