No hay artículos en el carro
No hay artículos en el carroCharlie Lima
Comentado en los Estados Unidos el 27 de noviembre de 2023
This works great with the small 18/ 20v portable air compressors. Perfect size pig tail for airing up tires. Quality is on par with the price point, and hose is flexible enough to use without binding.
Customer
Comentado en los Estados Unidos el 14 de noviembre de 2023
The Heavy Duty YOTOO Hybrid Air Hose 3/8-Inch by 36-inch 300 PSI makes a perfect Jumper from your oiler to your tool, water separator to reel, etc. The 3' long line is rated for 300 PSI making it the perfect choice to jump from a primary or secondary automatic water separator + tool oiler to the tool or pump inlet valve. Our shop air pressure is set to 175 Psi. this line handles well with no issues.A Rock Solid warranty, factory installed high quality brass couplers and fittings, oil and fuel resistant, heavy duty hose constructed with multiple layers for strength, makes for a quick dependable tool free installation in a wood, auto repair, or machine shop.
kip-CL
Comentado en los Estados Unidos el 2 de octubre de 2023
This Lead-in air hose worked great. I had an old one that had failed. This item works great and has been sitting for over nearly a week in the garage with air setting 110 lbs. That says a great item to me!
Deadwood
Comentado en los Estados Unidos el 19 de octubre de 2023
I have a few Yotoo hoses and fittings now and they seem to be good quality. I haven’t had any leaks on the older hoses going on 8-9 months with daily use and running between 150-175 PSI. I used this one as a lead from the compressor to a distribution center. This hose comes completely assembled, so no need to connect the fittings or fool with Teflon tape. No leaks, tested with soapy water so even if you can’t hear it, soapy water will find a leak. The hose is rated up to 300 PSI and is clearly marked, as such. The brass fittings seem to be good quality with nice reinforced rubber coverings (bend restrictors) at each end which should prolong the life of the hose. The fittings are 1/4” NPT Industrial fittings. I prefer the spring loaded type where you can just push them to connect, but these aren’t those. No big deal since the lead hose will not be messed with on a daily basis. Just plug it in and forget it. I replaced a 100% rubber hose that didn’t hold up in the sun. I’m hoping that this rubber/pvc hybrid hose holds up better to UV and heat/sun exposure. The hose itself is nice quality and flexible, without being too stiff, like a 100% PVC hose, or too heavy, like a 100% rubber hose. I have 100% PVC and 100% rubber in my shop and I like the different hose materials for different jobs. The 100% PVC hoses are significantly lighter weight and are best for tasks that require a light weight tool in the hand, like an airbrush. Rubber and hybrid hoses are too fatiguing for this task. Overall, this is a nice quality air hose, as expected based on my previous purchases and I recommend them for the purpose it was made for, a lead hose (whip) to make a short connection, typically from a compressor to some type of distribution center.
Mike R
Comentado en los Estados Unidos el 13 de octubre de 2023
My old lead-in air hose developed a crack after about 15 years and needed to be replaced. This one looked good at a decent price so I bought it. I installed it today and it seems good.Comments:--It came with quick-connect air hose fittings on each end (one male and one female). I didn't need these so I removed them to expose the standard 1/4" NPT male threads and connected to my system.--The hose says it is rated to 300 psi which is plenty, but it seems very "soft". It is quite flexible which can be good if you need that, but it makes me worry how long it wil last. My old hose was fairly hard rubber with braided cords in the middle of the rubber. It was hard to squeeze. This one is very easy to squeeze.Lets hope it does the job!
Productos recomendados