No hay artículos en el carro
No hay artículos en el carroDescripción del producto
El sistema de radar de respaldo invertido de coche Zone Tech ayuda a prevenir colisiones peligrosas y costosas que ocurren tan fácilmente cuando está detrás del volante. Esto ayuda a proporcionar mayor seguridad a los pasajeros, peatones y miembros de la familia que se encuentran alrededor del vehículo en movimiento. El sistema de radar también puede detectar niños pequeños y paredes bajas.
El sistema de radar inverso de coche Zone Tech está equipado con 4 sistemas de sensores instalados en el parachoques trasero del coche, CPU doble y chip avanzado para una mayor cobertura y detección. El sistema de radar inverso de coche Zone Tech está equipado con pantalla digital LED coloreada, compuesta de 3 colores; verde, amarillo y rojo, que muestra la distancia entre el coche y el obstáculo.
El sistema de radar inverso de coche Zone Tech está hecho de materiales de alta calidad para garantizar durabilidad y durabilidad. El sistema de radar está diseñado con circuitos de protección y componentes de alta calidad para evitar que el producto se sobrecaliente o se sobrecargue. El sistema de radar inverso de coche Zone Tech cuenta con una tecnología de entorno adaptativo. Esto ayuda a proteger el sistema de radar de la congelación y es resistente a la intemperie.
David W
Comentado en Canadá el 2 de enero de 2024
Everything is normal now .I hope it can be used for a long time.....
ddan
Comentado en Canadá el 6 de agosto de 2023
Easy to install. Works great.
Alberto
Comentado en México el 2 de mayo de 2021
Llevo un mes probando el sensor en mi carro. Me ha ayudado sobre todo en esta época de lluvias que no veía nada con los espejos, el sensor me indicaba la distancia que había cuando me estacionaba. Fue muy útil y para instalarlo sí necesitas herramienta especial, sobre todo que tuve que perforar la defensa para que entrarán y acomodarlos ahí.Si llego a tener problemas lo comentaré aquí.
Gil Daniel Perez Muñoz
Comentado en México el 29 de septiembre de 2021
Cumple su función
Roberto Pérez
Comentado en México el 27 de enero de 2020
Buen producto!
Miguel Angel Rodríguez Rubio
Comentado en México el 18 de octubre de 2018
Es muy fácil de instalar, trae casi todo para hacerlo. El único y gran problema es su precisión, pues aparecen medidas diferentes a las reales y las barras de colores tampoco son fáciles de interpretar.
Ser_Ar
Comentado en México el 24 de junio de 2017
funciono bien dos días, y actualmente no funciona, equipo de mala calidad y cables de conexion muy cortos, provocan problemas de instalación
EdKarL
Comentado en México el 8 de marzo de 2017
https://www.amazon.com.mx/dp/B0087QI3GM/ref=cm_cr_ryp_prd_ttl_sol_1Llego en buenas condiciones y con buen empaque, antes de los prometidoAL realizar pruebas la distancia de detección es algo menor de 2 metrosEn general bien por el costo.
dpw
Comentado en los Estados Unidos el 9 de diciembre de 2017
installed today on a 2012 Jeep wrangler JKU to help with parking and backing out of my buildings garage. took approx 3 hours start to finish. as always, make sure you plan the wire routes before drilling. i ran all four sensors from the bumper, up through the driver side tail light well, then connected everything to the little box in the trunk area. i only had an inch of wire remaining from the sensor on the far passenger side - lucky. the display screen comes with ample wire length, so you can put it wherever you want.tested in several scenarios and this thing is working great. beeped at a bicycle, a brick retaining wall, and even a 5 inch parking curb when i backed into a spot. pretty impressive for the price. no issues with the sensors picking up the spare tire or other phantom objects. i didnt pay any attention to the numeric reading on the display. the beep frequency and light bars are adequate for me. i'll mess with that later.i have to believe some of the negative reviews are due to poor installation or lack of 12V knowledge. just tap into the reverse power and ground in your tail light. i read someone's review that said it beeps even when not in reverse... that's impossible if it was wired correctly. if in doubt, take it to a professional.the only thing i don't love about this product is the start up "beep". if your shifting from drive to park, it beeps because you are momentarily in reverse. Not a huge issue but it annoys me. maybe a half second delay could solve that? still 5 stars.I was on the fence about these DIY sensor systems on amazon, but i am very happy i decided to try it out. i'll update if i have any issues. otherwise, i recommend it. looks good and works well.
Carlos Torres
Comentado en México el 8 de diciembre de 2016
Buen producto a un buen precio ya lo tengo instalado y funciona bien yo lo hice y fue muy fácil no es necesario agregarle un costo extra por la instalación
Cliente de
Comentado en México el 11 de noviembre de 2016
aun no lo eh conectado pero se ve de muy buen calidad hay que conectarlo para saber que tal esta pero tengo la sospecha que a de servir muy bien super rapida la entrega
Kyle W
Comentado en los Estados Unidos el 26 de junio de 2014
This is a great little sensor unit. I bought a titanium step bit per other reviews (the hole saw fell apart just trying to make a pilot hole for one of the spots.I installed this on my 2001 F150 Supercrew Lariat.I drill the 4 holes (took 2 days because drilling into the metal bumper killed my battery after 2 1/2 holes).Part way through, since my drill battery died, I decided to do the electrical work. I decided to tap in to the right reverse light. The power cable on the backup sensor unit has 2 wires, red (hot) and black (ground). The reverse light also has 2 wires. Mine had a solid black that was for ground and one with a blue stripe going up the wire for the hot wire. I cut the wire, stripped to expose the copper, tinned both with solder, tinned the power cable with solder, soldered all 6 ends (2 from the cable and the 4 from splicing the reverse light wire). I decided, since I had (barely) enough room, that I would keep the main unit in the light housing because the power cable was short and it would be a nice dry place to keep this located.I ran the 4 sensors wires over across (behind) the bumper and into the hole going into the reverse light area, plugged them in and then, since I didn't want to add wire and make holes/find holes, I ran the LCD/beeping alarm from the back seat and through the rear sliding window, down in front of the truck bed, and looped it through holes of the truck frame until it was in the same compartment as the other wires. My window closed tightly, I poured a bottle of water on the seam and it didn't leak, so this was a great place for me to put mine and, as I mentioned, I didn't have to add any extra wire to get this job done.I then zip tied all of the loose wires so they wouldn't snag on anything while driving and so it looks nice.FINALLY, and this is important, in reading reviews of these various backup sensors, I noticed a lot of people (not really on this one) complained about it constantly beeping while backing up even when there is nothing in the way of the sensors. I pulled each sensor out and realized that each sensor has an arrow pointing up and it says "up". I rotated each sensor to be pointing up and the random beeps are gone and it works great.I recommend this, and rest assured that its doable on a truck without adding extra wire! (as long as you have a rear sliding window and are willing to use it)
Purchaser
I have purchased 2 units and installed on car and provided toby make units instead Zonetech, found the performance is poor. it make noise without any objects. i am not satisfied with this products.
Productos recomendados
Mex $452.69
Mex $ 208 .00 Mex $208.00
Mex $566.52
Mex $ 300 .00 Mex $300.00
Mex $931.00
Mex $ 428 .00 Mex $428.00