No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Malla de acero inoxidable de 5 mallas
Material: Acero inoxidable 304. Apertura nominal: 4,5 mm. Diámetro del cable: 0,7 mm. Área abierta: 74 %
Malla de acero inoxidable de 10 mallas
Material: Acero inoxidable 304. Apertura nominal: 1,98 mm. Diámetro del cable: 0,6 mm. Área abierta: 61 %
Malla de acero inoxidable de 20 mallas
Material: Acero inoxidable 304. Apertura nominal: 0,9 mm. Diámetro del cable: 0,4 mm. Área abierta: 52 %
YY
Comentado en los Estados Unidos el 15 de febrero de 2025
The dishwasher I have has large gap/holes in the utensils basket. I cut it to fit in the bottom of the basket so that the utensils wouldn’t slip through to the bottom of the dishwasher. It works fine. So far no rust.
Tim Shanahan
Comentado en los Estados Unidos el 20 de enero de 2025
I bent mine into a rectangular box and it works great by allowing heat to move around the object I’m annealing or soldering.
Kristine M.
Comentado en los Estados Unidos el 21 de enero de 2024
This was perfect screen material to fit into my RV's hot water heater duct. I had two issues. The first being it was a bit tough to cut. I wrecked a good pair of wire cutters trying to cut the screen to size. The second issue was if you are trying to bend it to form it into place the welds between the wires tend to break. I found out the hard way and ended up cutting the screen leaving little lengths of wire as this kept the welds together. I was very surprised at what it did to my cutters. I would recommend using a Dremel with a cutoff wheel. Overall, very happy.
DD_Zen
Comentado en Canadá el 2 de septiembre de 2024
Although the mesh size is #5 (openings are larger), the wire size is no thicker than that used in a #10 mesh that I bought on amazon. This mesh is loosely woven, so it unravels/frays easily - the end strands fall off, sometimes while working the sheet. This might prove to be useful for some applications (easy to cut), but I was looking for something with greater structural integrity.
Justin M.
Comentado en los Estados Unidos el 23 de septiembre de 2022
I bought this in hopes to be like a netting for a cpu fan I turned into a portable fan powered via USB, I was worried about having the tools to cut it but was able to get past that. And I was able to line up the cut sheets to the fan, the fan has potential to cut probably a finger of and has cut some skin off me before, and I had to do some searching and decided on this. This was perfect, almost too perfect, the net doesn't bend in, atleast not too far that its dangerous, it's very sturdy and strong, the metal sheet didn't hit the fan blades but it does hit like the center of the fan and sometimes makes noises as it grinds against it, but no damage on the sheets end, some scratches on the fan but nothing dangerous, and also the holes in the sheet are so small, I doubt even a baby can fit its finger through it (not that I would try, just a estimation). The on my problem I have now is getting cut by the edges I left out after cutting cause they can go through skin, just gotta be careful and cut the edges off. But still it works perfect for a metal filter or metal net. I can even think of some cosmetic or prop use for leftover parts too. Well worth the purchase.
Productos recomendados
Mex $1,542.57
Mex $ 678 .00 Mex $678.00
Mex $980.79
Mex $ 451 .00 Mex $451.00
Mex $995.54
Mex $ 527 .00 Mex $527.00