No hay artículos en el carro
No hay artículos en el carroJane Garrison
Comentado en los Estados Unidos el 3 de febrero de 2023
Our 35 year old Casablanca Inteli-Touch fan died recently. The problem was on the electronics board inside the fan, and Casablanca no longer supports this technology. I'm somewhat handy with electronics, and I removed the Inteli-Touch electronics from the motor housing and converted the fan to a single speed model with a reversing switch. Next, I installed this remote control receiver in the same area. I checked the operation with the Casablanca wall switch that was included in this listing and the fan motor and lights worked fine. I rehung the fan, replaced the blades and everything works great. Don't forget to pair the fan receiver with the wall control, or it will not work.This was much less costly than replacing the fan, and the style of the fan we have is no longer made, so it was a win-win situation. You must convert the fan to a single speed unit prior to installing this kit in an Inteli-Touch model; instructions are available on YouTube. The required capacitor and optional reversing switch can be purchased from Amazon. The wall control can reverse the fan, so installing a reverse switch is not required.
Jose G. Peña
Comentado en México el 25 de octubre de 2023
Muy fácil de conectar y funciona perfecto
Su
Comentado en Canadá el 21 de junio de 2022
Works with my Hunter fan.No issues
Ben B.
Comentado en Canadá el 2 de noviembre de 2022
Was exactly what I wanted
happy customer
Comentado en los Estados Unidos el 26 de diciembre de 2021
Works ok but is not the same as original controller, can only operate one light setting, my fan/light had upper and lower light, now both have to be wired together.
Carolyn A.
Comentado en los Estados Unidos el 3 de septiembre de 2021
I purchased a Casablanca Wisp 52" White ceiling fan (Model 59284) and unfortunately the controller failed within the first year. The the two failure modes were strange, but annoying:1. On the lowest speed setting power to the blades would momentarily stop and then start again. Visually one could not see any speed difference because the power interruption was very brief. However there was an audible "thud" when power / rotational force was applied to the blades. This "thud" would happen randomly... A few minutes apart, and hour apart, etc. So it took a long time to track the noise to the fan!2. Similarly, when the light was on, it would flicker intermittently and randomly.My original controller was green (model number K803203000) and this item was a direct replacement. It worked perfectly with no issues, and has been operating fine now for more than a week.Pairing was simple. I have a Casablanca 99019 remote (looks similar to the 99020). Upon powering on this controller, I held the power button + 4 button on the remote. A few seconds later the blades started turning and the light turned on. Done. Super easy.
Productos recomendados
Mex $150.20
Mex $ 87 .00 Mex $87.00
Mex $514.15
Mex $ 282 .00 Mex $282.00
Mex $633.49
Mex $ 310 .00 Mex $310.00
Mex $4,174.14
Mex $ 1,881 .00 Mex $1,881.00
Mex $3,457.12
Mex $ 1,555 .00 Mex $1,555.00