Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

CSI FPC Cable flexible para Raspberry Pi 5, Pi5 Pi Cable de cámara de 22 pines a 15 pines, adecuado para conectar el módulo de cámara CSI a Raspberry Pi 5 o módulo de cálculo 4 (500 mm de longitud)

Envío gratis en pedidos superiores a Mex $600.00

Mex $248.59

Mex $ 131 .00 Mex $131.00

En stock
  • Cable flexible CSI para Raspberry Pi 5, adecuado para conectar el módulo de cámara CSI a Raspberry Pi 5 o módulo de cálculo 4 (CM4)
  • 22 pines a 15 pines, 500 mm de longitud
  • Ejemplo de aplicación: Conexión del módulo de cámara CSI a Raspberry Pi 5 o módulo de cálculo 4 (CM4)


Descripción general
1. Cable flexible CSI para Raspberry Pi 5, adecuado para conectar el módulo de cámara CSI a Raspberry Pi 5 o módulo de cálculo 4 (CM4)
2. 22 pines a 15 pines, 500 mm de longitud.
3. Ejemplo de aplicación: Conexión del módulo de cámara CSI a Raspberry Pi 5 o módulo de cálculo 4 (CM4)
Contenido del paquete Pi5-Camera-Cable-500mm x1


TONY ILLIG
Comentado en Canadá el 16 de abril de 2025
There was a solder drop on the cable. There was oxidation on the contacts. The cable had bend marks. See photos.
Will
Comentado en los Estados Unidos el 21 de mayo de 2024
Review of CSI FPC Flexible Cable for Raspberry Pi 5, Pi5 Pi Camera Cable 22Pin to 15PinThe cable itself works fine when connected between my RPi5 and Camera 3 module. Video is stable and I don't see any issues. The only slight drawback (and this isn't really a fault of the cable) is that I'm using a GeekPi NO4 NVMe HAT and it has a slot to feed the camera cable up through to the top, however the width of the slot assumes that the camera cable is the width of the CSI connector, and not the wider width of the cable that it expands to right after the CSI connector on the RPi side (see picture). I ended up having to route the camera cable out the side between the RPi5 and the NVMe HAT.
Sukru Tikves
Comentado en los Estados Unidos el 5 de octubre de 2024
I recently received the CSI FPC Flexible Cable, specifically designed to bridge the compatibility gap between the Raspberry Pi 5 and existing CSI camera modules. It is essentially something the foundation dropped the ball on by not being compatible.Pros:+ Compatibility Solution: The cable addresses the need to integrate new RPi 5 with existing camera modules+ Adequate Length: At 50cm, the cable is long enough to facilitate a variety of projects. Whether you’re setting up a security camera system with your Raspberry Pi or using it for OctoPrint in a 3D printing setup. I do OctoPrint for practical use, and sometimes others for fun.Brand Value: The cable came in a branded "Waveshare" box, which is a brand I had prior positive experience with.Cons:This should not have been necessary in the first place.
Productos recomendados

Mex $451.10

Mex $ 212 .00 Mex $212.00

4.4
Elegir

Mex $950.00

Mex $ 522 .00 Mex $522.00

4.7
Elegir