Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

DSD TECH SH-B23A Adaptador de serie Bluetooth 2.0 a RS232 con convertidor DB9

Envío gratis en pedidos superiores a Mex $600.00

Mex $376.13

Mex $ 206 .00 Mex $206.00

En stock

Acerca de este artículo

  • Adaptador Bluetooth RS232: con este adaptador Bluetooth RS232, puede comunicarse de forma inalámbrica con cualquier dispositivo RS232 en teléfonos inteligentes Android o una computadora habilitada para Bluetooth.
  • Módulo industrial Bluetooth 2.0 SPP integrado impulsado por el chip CSR BC417. Compatible con teléfonos Android y computadoras habilitadas para Bluetooth, pero no compatible con ningún dispositivo iOS.
  • Interfaz RS232 DB9: Tenga en cuenta que solo las señales Rx y Tx son válidas. No es compatible con CTS, control de flujo de hardware RTS.
  • PIN de emparejamiento Bluetooth: 1234, Parámetros de velocidad de baudio: 9600, N, 8, 1. Distancia de transmisión de más de 20 metros. La tasa de transmisión y el nombre y el PIN de Bluetooth se pueden configurar por software. DSD TECH proporciona software de configuración de forma gratuita.
  • Atención al cliente: ofrece soporte técnico permanente y un servicio de reemplazo de producto de 1 año. Todas las preguntas serán respondidas por ti dentro de 1 día hábil


El adaptador Bluetooth SH-B23A RS232 fue diseñado y fabricado por el equipo DSD TECH. Antes de lanzar este adaptador BT RS232, el equipo de DSD TECH tenía más de 4 años de experiencia en la fabricación de productos Bluetooth. Si tienes alguna sugerencia para este producto, no dudes en ponerte en contacto con nosotros.
Precauciones:
1. Este adaptador Bluetooth RS232 es compatible con teléfonos Android y computadoras habilitadas para Bluetooth, pero no es compatible con ningún dispositivo iOS. Si necesitas admitir dispositivos iOS, utiliza el modelo de dispositivo "SH-B23B".
2. Ajuste predeterminado: 9600, N, 8,1.
Si esta configuración no es la misma que la tasa de baudios de tu dispositivo RS232, deberás cambiar la tasa de baudios de este adaptador Bluetooth RS232 o puedes quedarte desagradable. Hemos proporcionado software gratuito y manual de instrucciones sobre cómo modificar la configuración de la tasa de baudios.
Ten en cuenta
1. DSD TECH proporciona software de configuración gratuito (solo es compatible con Windows PC). A través de un cable USB a RS232 puede modificar los parámetros del adaptador Bluetooth, como la velocidad de baudios, el nombre de Bluetooth, la contraseña de emparejamiento. Ten en cuenta que el cable USB a RS232 no está incluido en el paquete.
2. Este adaptador Bluetooth Rs232 solo soporta señales Rx y Tx. No es compatible con CTS, control de flujo de hardware RTS.
3. El comando AT no responde a través de una conexión Bluetooth. El comando AT solo responde a través del puerto serie físico (el puerto serie DB9)
4. Puente integrado. Puedes intercambiar TX, RX por puente.
Especificaciones:
Modelo NO: SH-B23A (SH-B30)
Estándar Bluetooth: V2.0 Clase 2 + EDR
Módulo Bluetooth: DSD TECH HC-05
Módulo Bluetooth: 9600 ,N,8,1
PIN Bluetooth: 1234.
Distancia: más de 20 metros.
Interfaz de comunicación: Modo serie estándar RS232 de 3 hilos (RxD, TxD, GND)
Fuente de alimentación: 5V DC
Temperatura de funcionamiento: -20 °C a 85 °C.
Contenido del paquete:
1 adaptador SH-B23A Bluetooth a RS232.
1 cable de alimentación USB a CC.
1 convertidor DB9 macho a macho.


dirk claesen
Revisado en Bélgica el 11 de enero de 2025
mooi afgewerkt. goede behuizing. Goed verpakt om te versturen. Snel geleverd. Top.Dirk
Bergisches Kind
Comentado en Alemania el 6 de diciembre de 2023
Seit 3 Jahren begleitet mich dieser kleine BT Adapter einwandfrei im Berufsleben.Ich muss mich oft auf diverse Geräte aufschalten (Switche, Router, FW, etc)Der wesentliche Vorteil, gegenüber Kabelgebundene Lösungen, ist der das ich die laute Umgebung (die ich teilweise vorfinde) verlassen kann und aus dem "leisen" Nachbarraum arbeiten kann.Die Rezension nach 3 Jahren auch aus dem Grund.... Heute ist das Ding mal runtergefallen und das Gehäuse hat es nicht überlebt (Der Deckel ist abgesprungen) Ich kleb das aber mit Sekundenkleber fest und wenn es dann wieder 3 Jahre hält bin ich nicht unglücklich und geben wirklich guten Gewissens volle 5 Sterne. Und bei dem Preis erst recht....
ste..mat
Comentado en Italia el 30 de junio de 2022
Oggetto indispensabile per collegare,bluetooth, un vecchio palmare necessario per il trasferimento dei dati di una stazione totale tipografica. Montato e configurato funziona perfettamente.
Nomic
Comentado en el Reino Unido el 5 de agosto de 2020
Had some problems with this as a cheap solution to connect on to Celestron (SLT mount) but it did work out great.A few things to note assuming you already know how to control your scope via a wired USB virtual serial port.(This unit connects to the bottom on the handset same as your wired serial connector).I powered this from a small 5v power bank and connected it as above but at first I could get no response from it. In order to troubleshoot I connected it in UART mode - connecting to direct to PC via USB virtual serial port but could not get it to acknowledge an 'ok' on software command and ask the supplier tech service for help (no reply, waste of time).I discovered that unless connections are dead tight it would not work- that sorted reconnected again and noticed the blinking led paused on trying to connect to scope. Had to reverse RX and TX wires (the only other one is GND, going to the handset) and got various messages about 'semifore time out' and 'no serial port' and 'no celestron scope detected'. Days later found that either unplugging the 5v power to the device ( it goes into sleep mode) or simply delete the com port in Windows (device manager > Bluetooth serial port> uninstall and then right click and reinstall which takes only a minute) - all errors go away and you have the pleasure of using your phone/tablet/laptop to control the scope.A few times I needed to briefly unplug the 5v supply to it when I see the led does not go steady(i.e not connecting) but no problem as it will reconnect on next attempt and you don't lose alignment.Hope this saved someone a lot of heartache!
Derrick
Comentado en los Estados Unidos el 4 de octubre de 2020
I'd been using the IOGear GBC232A for my projects and spending $70/ea on them. Wish I'd found out about this unit sooner - it does the same thing for a fraction of the price. I've only been using it for The one issue is that when I use it with devices where a straight-through cable typically works, I have to pair a null modem gender changer with this box instead of the regular one they include - not sure why they don't just include a null modem instead?UPDATE 2/13/2021 - at this point I have purchased and deployed around 20 of these units in the past few months to various customer sites. So far, one simply died after a few weeks of use and another has struggled / refused to connect out of the box. A ~10% defect rate is quite high.Update March 2023 - at this point I have over 80 of these at customer sites and they perform well and are reliable. Other than the occasional one that doesn't work out of the box, none have died since my previous review so I'm updating this to 5 stars.
Productos recomendados

Mex $130.00

Mex $ 66 .00 Mex $66.00

4.8
Elegir

Mex $1,039.55

Mex $ 530 .00 Mex $530.00

5.0
Elegir

Mex $255.00

Mex $ 130 .00 Mex $130.00

4.6
Elegir