mike

Comentado en los Estados Unidos el 28 de marzo de 2025

Works great

Jared Paulin

Comentado en los Estados Unidos el 21 de enero de 2025

Purchased these to replace the two non rgb fans that came in my Antec DF800. The front 3 were rgb along with the two fans from my thermalright assassin SE cpu cooler and wanted all the fans to be rgb. These are a bit different than the rgb fans that came with the case. The cables are wrapped in fabric making them a bit thicker but do feel more durable. They’re plenty long though since my rgb controller only has a 3 pin pwm connection so I had to use the connections on the mobo but it was easy since the cables were so long. These are also quieter than the two stick fans I replaced which is nice since I’ve yet to setup a fan curve in the bios. But I love the extra color in the rig and temps still stay low. I’ll be doing a stress test on the cpu soon to see if they truly perform as good as they look!

Lacey & Ken

Comentado en los Estados Unidos el 14 de enero de 2025

Unbolt old, install new. No noise. Super easy and straightforward. Fit was as expected. Make sure you get the washer/bushing in place so the pulley doesn’t drag on the washer when tightened. They seem to last a lot longer when properly installed.

Lacey & Ken

Comentado en los Estados Unidos el 14 de enero de 2025

Unbolt old, install new. No noise. Super easy and straightforward. Fit was as expected. Make sure you get the washer/bushing in place so the pulley doesn’t drag on the washer when tightened. They seem to last a lot longer when properly installed.

Lacey & Ken

Comentado en los Estados Unidos el 14 de enero de 2025

Unbolt old, install new. No noise. Super easy and straightforward. Fit was as expected. Make sure you get the washer/bushing in place so the pulley doesn’t drag on the washer when tightened. They seem to last a lot longer when properly installed.

Lacey & Ken

Comentado en los Estados Unidos el 14 de enero de 2025

Unbolt old, install new. No noise. Super easy and straightforward. Fit was as expected. Make sure you get the washer/bushing in place so the pulley doesn’t drag on the washer when tightened. They seem to last a lot longer when properly installed.

Lacey & Ken

Comentado en los Estados Unidos el 14 de enero de 2025

Unbolt old, install new. No noise. Super easy and straightforward. Fit was as expected. Make sure you get the washer/bushing in place so the pulley doesn’t drag on the washer when tightened. They seem to last a lot longer when properly installed.

Lacey & Ken

Comentado en los Estados Unidos el 14 de enero de 2025

Unbolt old, install new. No noise. Super easy and straightforward. Fit was as expected. Make sure you get the washer/bushing in place so the pulley doesn’t drag on the washer when tightened. They seem to last a lot longer when properly installed.

Lacey & Ken

Comentado en los Estados Unidos el 14 de enero de 2025

Unbolt old, install new. No noise. Super easy and straightforward. Fit was as expected. Make sure you get the washer/bushing in place so the pulley doesn’t drag on the washer when tightened. They seem to last a lot longer when properly installed.

Lacey & Ken

Comentado en los Estados Unidos el 14 de enero de 2025

Unbolt old, install new. No noise. Super easy and straightforward. Fit was as expected. Make sure you get the washer/bushing in place so the pulley doesn’t drag on the washer when tightened. They seem to last a lot longer when properly installed.

M. Short

Comentado en los Estados Unidos el 1 de abril de 2025

Matches aesthetic of my constellation c8 case. Nice pwm/rgb splitter included. Not too noisy. I wouldn't consider them silent.

NomersMcBorg

Comentado en los Estados Unidos el 23 de agosto de 2024

My AC compressor failed on my truck, and I don't have the money to replace AC components right now. I used this pulley in place of a different pulley when I replaced the belt with a shorter one to bypass the pulley on my 2003 F150. One is ribbed for the belt and one is smooth for the back of the belt. I had to get this one to work with the belt routing being different. It worked great.

NomersMcBorg

Comentado en los Estados Unidos el 23 de agosto de 2024

My AC compressor failed on my truck, and I don't have the money to replace AC components right now. I used this pulley in place of a different pulley when I replaced the belt with a shorter one to bypass the pulley on my 2003 F150. One is ribbed for the belt and one is smooth for the back of the belt. I had to get this one to work with the belt routing being different. It worked great.

NomersMcBorg

Comentado en los Estados Unidos el 23 de agosto de 2024

My AC compressor failed on my truck, and I don't have the money to replace AC components right now. I used this pulley in place of a different pulley when I replaced the belt with a shorter one to bypass the pulley on my 2003 F150. One is ribbed for the belt and one is smooth for the back of the belt. I had to get this one to work with the belt routing being different. It worked great.

NomersMcBorg

Comentado en los Estados Unidos el 23 de agosto de 2024

My AC compressor failed on my truck, and I don't have the money to replace AC components right now. I used this pulley in place of a different pulley when I replaced the belt with a shorter one to bypass the pulley on my 2003 F150. One is ribbed for the belt and one is smooth for the back of the belt. I had to get this one to work with the belt routing being different. It worked great.

NomersMcBorg

Comentado en los Estados Unidos el 23 de agosto de 2024

My AC compressor failed on my truck, and I don't have the money to replace AC components right now. I used this pulley in place of a different pulley when I replaced the belt with a shorter one to bypass the pulley on my 2003 F150. One is ribbed for the belt and one is smooth for the back of the belt. I had to get this one to work with the belt routing being different. It worked great.

NomersMcBorg

Comentado en los Estados Unidos el 23 de agosto de 2024

My AC compressor failed on my truck, and I don't have the money to replace AC components right now. I used this pulley in place of a different pulley when I replaced the belt with a shorter one to bypass the pulley on my 2003 F150. One is ribbed for the belt and one is smooth for the back of the belt. I had to get this one to work with the belt routing being different. It worked great.

NomersMcBorg

Comentado en los Estados Unidos el 23 de agosto de 2024

My AC compressor failed on my truck, and I don't have the money to replace AC components right now. I used this pulley in place of a different pulley when I replaced the belt with a shorter one to bypass the pulley on my 2003 F150. One is ribbed for the belt and one is smooth for the back of the belt. I had to get this one to work with the belt routing being different. It worked great.

NomersMcBorg

Comentado en los Estados Unidos el 23 de agosto de 2024

My AC compressor failed on my truck, and I don't have the money to replace AC components right now. I used this pulley in place of a different pulley when I replaced the belt with a shorter one to bypass the pulley on my 2003 F150. One is ribbed for the belt and one is smooth for the back of the belt. I had to get this one to work with the belt routing being different. It worked great.

Joshua

Comentado en los Estados Unidos el 20 de diciembre de 2024

No se pudo cargar el contenido.

JVazquez

Comentado en los Estados Unidos el 11 de noviembre de 2024

Really good ones,

Omar

Comentado en México el 14 de febrero de 2023