No hay artículos en el carro
No hay artículos en el carroLa pistola de pegamento caliente HD250 de AdTech es un verdadero destacado entre las pistolas de pegamento termofusible de grado industrial, y una herramienta ideal para contratistas y comerciantes en muchos campos. La válvula de aguja es una característica de diseño exclusivo que permite al usuario colocar líneas de pegamento precisas y uniformes, con cortes perfectos, y no más goteo y cuerdas. Esta herramienta de calidad excepcional cuenta con un agarre acolchado acolchado, un soporte extraíble y un gatillo de presión fácil que permite largos tiempos de trabajo con resultados superiores.
Captains2012
Comentado en los Estados Unidos el 22 de marzo de 2025
Great great product easy to use hot hot hotSmooth trigger action. Lots of heatLooks to made heavy duty
Marco V.
Comentado en México el 2 de marzo de 2025
Son muy buenas, ya que a mí normalmente las convencionales se me movían y estás como si no tuvieras
Customer
Comentado en Canadá el 23 de enero de 2025
wow this thing heats up really fast.
Felipe Velasquez
Comentado en México el 12 de agosto de 2024
no se aguanten los madrazos
Shari Rosete Bailon
Comentado en México el 15 de noviembre de 2024
Muy ligeras y delgadas no cumple su función
Goo
Comentado en los Estados Unidos el 27 de octubre de 2024
This is not an industrial-quality glue gun. For light occasional use it's a good tool. It does require industrial quality glue with 1/2 inch diameter and high melt temperature. Great for heavy duty jobs. It's going to be useless for crafting. Low temperature glues will just run through it and smaller diameters will not feed right.
Maikol
Comentado en México el 25 de octubre de 2024
Está perfecto 👌 todavía no utilizo las 2 sólo la izquierda porque tengo una herida en la derecha,tengo Insuficiencia Venosa y la piel muy sensible,hacen la función dé medias de compresión y si muy recomendables pará las personas que la van a pedir elijan bien la talla ya qué hay varias medidas, yo en cuánto utilicé las 2 voy a pedir otro par dé repuestos cuándo tenga que lavarlas.
Alejandra L.
Comentado en México el 21 de abril de 2024
Según la persona dice que son cómodas, le permiten jugar mejor y no batalla con las espinilleras tradicionales.
Javier Torres
Comentado en México el 30 de marzo de 2023
Muy bueno funciona al 100
Paola Reyes spindola
Comentado en México el 26 de enero de 2022
ME GUSTO MUCHO, ES IGUAL A LA FOTO Y SUPER FUNCIONAL.
Raúl Molina
Comentado en México el 30 de junio de 2021
Super recomendable para uso rudo
Mildred
Comentado en México el 24 de marzo de 2021
Excelente producto para uso rudo y continuo. No chorrea ni desperdicia. La mejor que he comprado.
RODOLFO MORALES QUIROZ
Comentado en México el 7 de diciembre de 2021
Mantiene el calor uniformemente
Constantino Rubén Zárate Díaz
Comentado en México el 31 de diciembre de 2021
Si es bueno el producto lo único malo es de que no cuenta con un botón de encendido y/o apagado 📴 todo sus componentes son de muy buena calidad
D. Berube
Comentado en Canadá el 1 de octubre de 2020
I looked for quite awhile before settling on this AdTech Pro 200 glue gun as there's plenty of cheaper guns on the market but this came highly reviewed and 3M themselves rebrand this very glue gun to sell with some types of their own glue sticks so it seemed like the perfect choice. That proved to be true as combined with high strength glue sticks from either Stanley or DeWalt I've repaired plenty of items with this glue gun. Plus unlike cheap guns I've used in the past, once this gun is hot it can really push glue. With shorter sticks it's actually not that hard to use up a stick quite quickly. Plus while this gun is corded, it retains heat very well so if don't have a wall socket near your project, you can still push glue with this gun unplugged for a solid couple of minutes without issue so be careful where you leave this while it's cooling down as it does take awhile.In short I couldn't ask for a better glue gun as while I don't have cause to use a glue gun most days, it's good to know that should the need arise to repair something that hot glue can fix, I have a reliable glue gun at the ready.
Mayo
Comentado en México el 28 de septiembre de 2020
Calienta rápido y se mantiene así.
Cliente de
Comentado en México el 5 de agosto de 2019
llego a tiempo
Sherweld
Comentado en los Estados Unidos el 22 de julio de 2015
Best ever in a long sad line of previously owned toy glue guns.One of the best features of this model, is the very positive glue stick advancing mechanism. When the installed glue stick is consumed to the point that it no longer advances, simply insert a fresh stick and keep on gluing without interruption.No messing around trying to bond new stick to old, or trying to hold the work piece, pull the trigger, and keep pressure on the new stick using only two hands.The gun holds its temp well with minimum standby dribble, but when the trigger is pulled, this baby delivers some very hot product, which definitely helps ensure a firm bond. The first test of this was to hold a slightly bowed piece of 3/4" plastic lumber flat against a flatter fir board in order to resurface the plastic lumber through a thickness sander, (to prepare a small sign). The approx 2" dia spot of hot glue not only held the plastic lumber flat against the fir board during the sanding, but tore away some splinters of wood from the fir board during removal. This even after applying denatured alcohol which normally acts as a pretty good release agent for hot glue bond.One of my pet peeves of previous glue guns is the instability of most while on standby. It seems that it was always too easy to somehow tip many of these toy guns over, off the table, under the workbench, etc. This model has addressed standby probably as well as I've seen done. The removable stand under the grip, and the flip down stand under the nozzle, make the standby mode almost "bomb proof" while pretty well staying out of the way while actually gluing. Also this gun while not at all "heavy", is somewhat heavier than most, which also seems to make the standby mode more secure.One con however is the rubber overlay on the palm side of the pistol grip. It is supposed to be held in place by numerous little nubbins fitting into slots in the plastic grip. The nubbins on my model neither seem to fit nor grip, but certainly not a deal breaker. With or without the rubber overlay, for the price, the best glue gun I've encountered.
Productos recomendados
Mex $2,521.08
Mex $ 1,260 .00 Mex $1,260.00
Mex $160.00
Mex $ 91 .00 Mex $91.00