No hay artículos en el carro
No hay artículos en el carro
El sistema dispensador de agua caliente instantáneo InSinkErator HOT150 es la adición más nueva y asequible a la serie Invite. Tan simple y útil, una vez que lo utilices, te encantará al instante.
Con agua casi hirviendo a tu alcance, puedes disfrutar de la comodidad de preparar al instante café gourmet y té caliente, cocinar verduras al vapor en un instante, calentar biberones en segundos, quitar la cera de velas de los portavelas con facilidad, limpiar sin el uso de productos químicos agresivos, quitar tapas y etiquetas difíciles, y mucho más.
El dispensador instantáneo de agua caliente HOT150 cuenta con un moderno llave de agua caliente con acabado de níquel satinado y tanque de acero inoxidable de 750 vatios, 2/3 galones que ofrece agua casi hirviendo. Un termostato fácil de ajustar te permite controlar la temperatura de 160 grados F a 210 grados F.
El sistema HOT150 está diseñado para la instalación de bricolaje sin necesidad de fontanería especial. Prácticas conexiones de tanque sin herramientas y protección de arranque en seco que proporcionan una fácil configuración y tranquilidad. El sistema requiere una toma de corriente de CA sin conmutar, válvula de control dedicada con ajuste de compresión y ajuste en T. El llave requiere un agujero estándar de 1-1/4 pulgadas a 1-1/2 pulgadas de diámetro para la instalación con un grosor máximo de contador de 2 pulgadas.
InSinkErator cubre los dispensadores instantáneos de agua caliente HOT150 con una exclusiva garantía limitada de servicio completo en casa de 1 año que llegamos a ti. Esta garantía incluye llamadas domiciliarias gratuitas (incluidas piezas y mano de obra) durante todo el período de garantía.
Judith Finn
Comentado en Canadá el 21 de enero de 2025
Love it
Customer
Comentado en México el 1 de abril de 2025
Facil de instalar funciona de maravilla
Ruby T
Comentado en los Estados Unidos el 30 de julio de 2024
No se pudo cargar el contenido.
T. Tomlinson
Comentado en los Estados Unidos el 8 de junio de 2024
If you are comfortable putting a new faucet onto a sink then this should be no trouble for you. A pro plumber should have no trouble at all. All you need is a spare hole in the counter where you want the hot tap to go, and a 115v socket under the sink where you want the main unit to go. Keep in mind that the socket will need to be hot at all times to keep the water in the tank hot. My socket was switched so that it controlls the garbage disposal. I was replacing my disposal at the same time, so I added an insinkerator countertop switch (requires another spare countertop hole). Now I just leave the wall switch on, which keeps the HOT150 powered, and use the counter switch to turn the disposal on & off. If i want the hot water off like if I'm off on vacation, I can just flip the wall switch. If you don't have a countertop hole for this, you might need to rewire your under-sink socket so it has a switched socket, and an always-hot socket.The water lines provided are somewhat short, so I got a 18in piece of braided stainless hose and adapted it to the lines from the unit. The unit uses a 1/4" copper tube as its main feed line, so you will need to purchase a T-fitting to add a new outlet on your sink's supply to feed the unit, and a compression fitting for the copper line, plus whatever other tubes and adapters. In my setup I have a standard sink tee->braided hose->stepdown adapter->compression fitting. you may wind up with something a little different depending on if you need the extra hose and what fittings your store carries.once you have all the connection bits its really plug and play: drop the faucet in from the top, screw the unit to the wall, plug in the lines from the faucet to the unit, connect the copper feed to the sink supply. Then you flush the unit for a couple of min and plug it in. Job done.In operation its pretty simple. I didn't flush as carefully as the instructions say and I did get some gurgling noise when its heating for the first day or two. I also found that when turned all the way up it actually boils the water inside. Possibly due to some air pockets, but I'd leave it set at 75% or lower to start, as it can definitely heat up above 212deg in some cases. safer to start on the cool side and bump it up till you get the temp you want. After I got the temp dialed in and the air flushed out its been quiet and excellent. I live a lone so I'm making single drinks at a time - I don't know if larger families might find the reservoir too small.Overall if basic plumbing (and possibly a little electric work) don't bother you this should be easy to install and seems to be a nice unit.
Tony
Comentado en los Estados Unidos el 13 de noviembre de 2024
We've been using this for several months. Water is hot like we want and we've had no leaks or problems. Simple to replace our previous install.
WMM
Comentado en Canadá el 27 de noviembre de 2023
Good quality and very functional...glad I purchased the lever action rather than the push button...like the way that the lever springs back (safety). My plumber installed it when he was doing something else for me, -so I don't know how it would gone for me...was easy for him. This item has turned out to be even more useful for our daily routine than I initially anticipated.Good purchase.
Productos recomendados
Mex $5,454.90
Mex $ 1,881 .00 Mex $1,881.00
Mex $17,428.67
Mex $ 1,881 .00 Mex $1,881.00
Mex $11,441.50
Mex $ 1,881 .00 Mex $1,881.00
Mex $7,417.95
Mex $ 1,881 .00 Mex $1,881.00
Mex $9,905.38
Mex $ 1,881 .00 Mex $1,881.00
Mex $13,169.49
Mex $ 1,881 .00 Mex $1,881.00