Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

InSinkErator Invite Contour - Sistema dispensador de agua caliente instantáneo - llave y tanque, cromo, H-CONTOUR-SS

Envío gratis en pedidos superiores a Mex $600.00

Mex $5,454.90

Mex $ 1,881 .00 Mex $1,881.00

En stock

1.Nombredelestilo:Sistema Dispensador


Acerca de este artículo

  • El dispensador de agua caliente proporciona 60 tazas / hora de agua casi hirviendo.
  • Incluye tanque de acero inoxidable de 2/3 galones
  • Características fáciles de ajustar el control de temperatura.
  • Conexiones del tanque sin herramientas y protección de arranque en seco para facilitar la instalación
  • Incluye 3 años de garantía de servicio a domicilio.


Invitar a Series, cromo, dispensadores de dispensador de agua caliente, sólo caliente, cerca de ebullición 200 grados, incluye depósito de acero inoxidable de 2/3 galones, fácil de ajustar el control de temperatura, herramienta última intervensión de Tank conexiones & Dry protección de inicio para facilidad de instalación, proporciona 60 tazas/hora de cerca de agua hirviendo, 3 Año Garantía de servicio Home Service, 115 V, 750 W, 6,25 A.


Melba
Comentado en los Estados Unidos el 20 de marzo de 2025
This is a game changer. I had a smaller version of this at a previous home but this is definitely worth the upgrade. We use it every day and getting the temp set to just the right temp is so simple!
Melvyn Kaufman
Comentado en Canadá el 13 de junio de 2024
Works great and was exactly as described but was short a pressure coupling nut and had to go to hardware store and purchase one. Lost 1 hour of plumbers time.
Janice K
Comentado en los Estados Unidos el 11 de octubre de 2024
It was installed a week ago. I had another model but it started to spit out the hot water. Overall I like the way this handle fits in my hand. The water flow is even and of course the water is HOT. Looks great.
PTS
Comentado en los Estados Unidos el 23 de febrero de 2021
The product has worked as advertised since I installed it two or three months ago and so far has proven completely satisfactory.Installing it was straightforward for me and should be for anyone with even fairly basic home maintenance/repair skills. The installation instructions are thorough and clear. If you don't have a hole available in your sink or countertop for the hot water dispenser, you'll need to drill a 1-1/4" to 1-1/2" hole. This could be easy or a gigantic, messy hassle, depending on what your sink and countertop are made of, how things are laid out, etc. Or you could sacrifice your pull-out spray hose or soap dispenser, if you have one of those installed, and use that hole.Note that you will need electricity under the sink, either an outlet or a junction box -- everything safely installed and legal, of course. If you don't already have that, getting electricity within the reach of the dispenser's power cord (about 24", if I recall correctly) could be a project unto itself. If you have a dishwasher or garbage disposal installed, you're probably all set. TURN OFF POWER AT THE CIRCUIT BREAKER BEFORE ATTEMPTING ANY ELECTRICAL WORK.The hot water tank itself measures about 6" w x 13" h x 7" d, so make sure you have somewhere under your sink to hang the tank that near the hole where you will install the hot-water tap.Before you go to the hardware store to buy the tee fitting you'll need, check the sizes of both the cold-water supply line to your faucet and the cold-water angle stop (the shutoff valve) under your sink. You might need to buy an adapter or two as well as the tee fitting and some teflon tape (thread sealer) to assemble everything. The hot water dispenser comes with a 1/4" supply tube, either plastic or copper, depending on the model, and a ferrule and nut for a compression fitting. Ask someone at the hardware store who knows what he/she is talking about if you're not sure exactly what parts you need -- there are a million variations, sizes, and configurations, and it can be easy to get confused.I haven't measured the water temperature, but it is definitely scalding hot at the default setting.The product is a luxury and a convenience that I use multiple times a day.
Mr Canuck
Comentado en Canadá el 14 de diciembre de 2019
We love our new hot water dispenser. The quality is good for the money.Prior to install make sure you have an electrical outlet under sink.I found the tubes provided a little short. I extended one and the other needed clamping to stay on tight. Minor issues.The functionality is awesome. It works so well and is a great convenience and addition to any kitchen.I hope my review and pictures help you with your decision.
Productos recomendados

Mex $367.05

Mex $ 179 .00 Mex $179.00

5.0
Elegir

Mex $8,747.08

Mex $ 1,881 .00 Mex $1,881.00

5.0
Elegir

Mex $7,417.95

Mex $ 1,881 .00 Mex $1,881.00

4.9
Elegir

Mex $205.81

Mex $ 111 .00 Mex $111.00

4.5
Elegir

Mex $17,269.63

Mex $ 1,881 .00 Mex $1,881.00

4.7
Elegir