This Thermalright Frozen Prism 240 AIO cooler is fantastic! I use it every day, and it performs flawlessly. My CPU temps dropped significantly, staying cool even under heavy load. The dual 120mm fans are quiet yet efficient, and the ARGB lighting looks awesome without being overpowering.I charge up my rig in the morning, and it keeps everything cool throughout the day during gaming and multitasking. The installation was straightforward, and everything fit perfectly on my setup. If you're looking for a high-performance AIO cooler with style, this is a solid choice. Highly recommended!

Was looking for a cheap AIO to replace my fan cooler. This product was extremely affordable and fairly easy to install. Using a NZXT H5 Flow 2024, which only fits a 240 mm rad up top. The ram clearance is great on my Gskill sticks. This thing looks great. Hopefully it lasts. I'm very satisfied.Temps are high 30s C on idle. Max of 72 C under load playing cyberpunk on ultra.

Just finally got to start using this and I have to say that I'm really impressed. I was impressed by the quality of the board, the accessories, and the ease of use. I just recently underwent surgery 8 weeks ago, so I wanted to start out easy as I didn't really know what to except from the board. I was blown away that even on a low setting, I was able to feel it working throughout my entire body. It wasn't rough on me at all, very gentle motion on the low setting. I am looking forward to using this board and seeing the results that I wanting to achieve.

Great colors, super quiet, and very efficient and effective for CPU cooling. There was a slight hiccup with the incorrect product being sent initially, but the customer service was phenomenal and went above and beyond to ensure I was taken care of.I will update further later on after I've used it for a more extended period of time in order to give a more long term review

This is a good cooler, cant go wrong for the price especially. Im using it to cool an RTX 3080 and it idles a at a good solid 33c. Which is what my corsair cooler i had was doing. Ive used corsair AIOs for years until recently it had a mandatory update which bricked my cooler. So I ended up giving this one a shot and so far no issues, been a few months now. Ive got the pump set to run 100 percent and using EVGA precision to control the fans. Good solid cooler.The only issue isnt the AIO itself its the directions. AS in theres not really any. I think it has software i downloaded something but a lot of it is in Chinese and i couldnt really figure out what to do for sure. I installed it tried to use it and just ended up manually setting the pump and using precision like i say.If you need a replacement cooler and dont want to invest a lot try this one.

I'll be upfront, I bought this for the heck of it. I was using a tri-stack aircooler that many regarded as legendary. But after one of it's fans died, I decided to browse for a new cooler. Seeing many aircoolers lose LGA 2011 compatibility stung a bit, and seeing that the only options left were high in price stung even worse.Then I stumbled upon this gem. At first, I thought it was some sort of scam, or a poorly made product. Seeing how, especially these days, many vendors such as Corsair would gladly sell you basically the same product for $150 or more. But for $48 at the time of writing... why not give it a shot?I'm not unfamiliar with Thermalright, as I've used their air coolers previously and found them to be an impeccable value, albeit with unclear mounting instructions.The box contains a cardboard placeholder and some foam, simple but effective. I took out all of the necessary paperwork and mounting parts, and began reading the manual.It was decently laid out with a page for each socket, and the parts were labeled with letters, referenced in the manual. Not bad! Mounting my 2011-3 brackets was pretty straightforward.After mounting, I hooked up the two fans with a PWM splitter, attached to the CPU fan header. I hooked my pump into a case fan PWM, which I set to run at max speed. I always put my pump to full speed to prevent any speed fluctuations, as the gears in most AIO pumps are very fragile to changes in torque.It's overall build quality is impressive; braided hoses with well sealed metal ends. The fans are already screwed in, with their correct orientation, and the finish on the radiator feels smooth to the touch. Albeit the mounting brackets for LGA 2011 had some rough edges that could cut you if you weren't a seasoned system builder.After that, I took my 8-core xeon, and gave it a thorough stress test in Aida64 (CPU/FPU/RAM/Cache). My 1660v3 was at 4.3ghz, and 1.220v at the time of the first test. After 1 hour, it *peaked* at 61 degrees. I was worried none of my threads were being utilized, but the cores all had load, and the idle temps were around 22-23 before starting.Unreal. For this price? What are you giving up?Simple. It's not RGB. It does have an ARGB header for the screen on the pump to do temp readouts, but I couldn't be bothered. My board is too old to have that anyhow. Alongside the fans being rather noisy even at low speeds, but they push an insane amount of air for being cheaper included fans.But... considering the performance at a fairly heavy overclock, what happens when you punish it severely?I chugged my pot of coffee, still scalding hot, and managed to put my chip at an eyebrow-scorching 1.455v. Pinned it to 4.5ghz, opened Aida64, and let it rip.Max core temp? 87 degrees. Package hit 89.After one hour, at 1.455v, at literally 125% of it's base clock. On a platform known for making power bills turn into a medical bill.If you paired this with a good set of quieter, high-RPM fans in push-pull, I'd see no issue with this cooling chips that draw 200+ watts under load effectively.To say I am beyond impressed is an understatement. I am awestruck. I've used other cheap AIO's, but this unit is something else.Do not let the price scare you. It is not a scam, and in fact, it'll gladly leave you another $100 in your budget for that higher-tier GPU.Buy it.

The product is solid. Installing elastic cords to meyal side loop was easy, though in the reviews it seemed hard for others. If you cant figure it out on your own, ask a mechanically minded person to help you.It does what it should. It actually feels relaxing. My only complaint would be the shortness of the cord.For most people, I think it will require an extension cord. The only place I can use it without an extension is in my main hallway, which is too dangerous a place to keep it. (tripping hazard) and the unit is too heavy to be moving about often.It's a little noisy but not too noisy to watch TV while using.I'm happy and would highly recommend. I hope it helps me avoid osteoporosis.

I've only had this machine for a couple days now but, so far, so good! For the short time I've had it I already love it! I originally bought it for lymphatic drainage but my muscles are sore like I've done an extensive weight training session. I typically have a hard time activating my glutes and hamstrings due to having an anterior pelvic tilt, so its a struggle getting proper form, but with this machine, my hamstrings and glutes feel like they've had a good workout. I can't wait to see what else this machine does. So if you're second guessing, quit! Just buy the machine!

I've had a vibration plate for a few years now, a proper stand on one. Didn't use it often, big ugly clothes horse. Well it broke after Christmas. Did i want another? I decided yes but not like the old one.I've used the ones at the gym's that you can barely feel and my old one that would nearly launch you.I did my research and decided between bluefin, Reviber or stretch to a Hovert. Looking at the images i noticed most were using the same form factor for the base. I decided on the Reviber because of reviews and a couldn't stretch to the Hovert. Mistake. Sat on it a trapped my finger tips under the little grab recessed sides. Had a look and realised there is a serious design fault on it. There should be no way anyone should be able to get their fingers trapped but there it was. Sent it back.Decided on the Hovert which has the same form factor base but they have redesigned the seat so no grab areas can trap your fingers. A big plus. Now down to business.The HOVERT.After using home and gym plates this is excellent. It's extremely quite, it has excellent programs and you can use it it manual also. Good little book explaining how it works and brilliant online support. It's not as violent as my old one which i thought was too rough and may cause problems with joints. Lots of research on vibration plates on line and even NASA use them. They're not just about loosing weight. There's a lot more to them than that. The science behind them is solid and now proven and this plate works brilliantly. The booklet has exercises to follow and explains the programmes well. Excellent for a multitude of muscular skeletal problems, great for toning muscle when engaged or great for a quick massage. Great for improving circulation especially for diabetics, helps drain excess lymphatic fluids and breaking down cellulite. If you suffer from allergies like myself this plate helps use up histamine, bonus. Sometimes i just stand on it while watch tv. Stresses just sink away.Only one negative from me and thats the position and size of the control panel. A minor inconvenience you get used to and avoid.This is an honest review for a great plate and it's well worth the extra price tag.

I really setsfide