Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Ubiquiti Networks Ubiquiti EdgeRouter 6P, 6-Port Gigabit Router with 1 SFP Port (ER-6P-US)

Envío gratis en pedidos superiores a Mex $600.00

Mex $4,670.07

Mex $ 1,881 .00 Mex $1,881.00

En stock

Acerca de este artículo

  • Avance en precio/rendimiento. El EdgeRouter 6P ofrece un valor de precio/rendimiento de próxima generación: hasta 3,4 millones de paquetes por segundo de procesamiento con una velocidad de línea de hasta 6 Gbps.
  • Diseño versátil. El EdgeRouter 6P se puede montar en rack con el uso del kit de montaje en rack EdgeRouter modelo ER-RMKIT (se vende por separado).
  • Gestión centralizada. El EdgeRouter 6P es compatible y administrado por UNMS (Ubiquiti Network Management System), un controlador completo con una interfaz de usuario intuitiva.
  • (5) puertos Ethernet de 10/100/1000 Mbps y (1) puerto SFP
  • Procesador MIPS64 de 4 núcleos de 1 GHz


Tecnología avanzada de enrutamiento para las redes massesubiquiti introduce el edgeroutertm 4 y edgerouter 6P, la próxima generación de routers para la plataforma de EdgeMax. edgerouters combinan carrier-class fiabilidad con funciones de nivel empresarial en una unidad compacta y asequible.El edgerouter 4 y edgerouter 6P ofrecen una puertos Gigabit Ethernet y un puerto SFP para un enlace de fibra. El edgerouter 6P también ofrece cinco configurable puertos PoE para alimentar productos AirMax.El edgerouter 4 y edgerouter 6P son cada uno capaz de enrutamiento hasta 3,4 millones de paquetes por segundo. La tasa de edgerouter 4 tiene una línea de 4 Gbps, mientras que el edgerouter 6P tiene una tasa de línea de 6 Gbps.Impulsado por un patentada e intuitiva interfaz gráfica, edgeos, edgerouters puede ser fácilmente configurado para enrutamiento, Características de gestión de seguridad, y es necesario para ejecutar su red de manera eficiente. Para profesionales de la red, integrado, CLI está disponible para acceso rápido y directo mediante comandos familiar.Mayor comodidad y flexibilidad es proporcionada por la aplicación de unms, lo que hace que sea posible para gestionar la edgerouter de forma remota desde su dispositivo móvil.Administrar su networkdhcp servidor Configurar múltiples servidores de DHCP para Asigne IP rangos en diferentes interfaces de red en los diferentes.Controle fácilmente Addressing para sus dispositivos de red IP dinámica y estática.Herramientas de monitoreo cómodamente seguimiento de actividad de red y dispositivos de herramientas como Ping, rastro, monitor de captura de descubrir, paquete, y registrar.Asegure su networkfirewall políticas organizar las reglas que aplicar en el orden que especifica.Firewall grupos aplicar el políticas a grupos filtrado por dirección IP, dirección de red, o número de puerto.Nat la edgerouter cambios paquete Addressing basado en su fuente a medida y reglas de destino Nat.Directo del tráfico flowinterfaces cada puerto interfaz funciona como un no empotrado.También puede configurar Virtu


Christian
Comentado en Canadá el 12 de febrero de 2024
Pour les connaisseur et pratiquant des commandes linux. Une fois cet obstacle maîtrisé, il est stable, performant et très facile d'utilisation.
Phil Stracchino (Technical Thug)
Comentado en los Estados Unidos el 21 de julio de 2019
I bought my EdgeRouter 6P as an upgrade from an EdgeRouter POE, and so that I can have two working routers and do not have to be offline while upgrading the firmware. I previously tried an EdgeRouter X for this purpose and found it to be useless because the ER-X has so little storage. Just enable logging, and the ER-X hit disk-full and stop working in two weeks.The ER-6P is another story. It has 4GB of flash storage to the ER-POE's 2GB, 1GB of RAM to the ER-POE's 512MB, and four 1GHz MIPS64 cores to the POE's two 600MHz cores. It is a MUCH more powerful router for not very much more money. It arrived back-rev'd on the firmware, but it is a matter of a couple of commands to reflash it to the latest version.Also unlike the ER-POE, the EdgeRouter 6P has an optional rack-mount kit available (that will fit anything from an ER-4 to an ER-12).Some users complain about the administration GUI. I find it OK, but I don't use it for most configuration tasks, just for traffic monitoring, preferring to ssh login to the router and use the command-line. I also don't use the supplied firewall functionality, preferring to use Shorewall instead, which I find both much more powerful and much easier to configure. (The rule-chains interface used by netfilter is cryptic and pointlessly arcane.) My ER-POE is now a spare; I will use it to test out new firmware releases and while updating the 6P.If you have an older EdgeRouter and want to get more performance, this latest generation of routers is a good upgrade. If you're just getting started, they provide much better performance than anything Netgear or D-Link will sell you — but you DO need to at least somewhat know what you're doing. You will still need a cable or DSL modem; these routers will not do that for you. If you want to have WiFi, the EdgeRouter won't do that either; consider trying one of Ubiquiti's Unifi wireless access points instead. A Unifi WAP will give you much better wireless coverage than almost any wireless router appliance on the market, for less money, and you can add additional WAPs if you need more coverage much more easily than you can add additional consumer wireless routers.
ashforma
Comentado en Canadá el 28 de septiembre de 2019
Excellent product, working as expected, greatly improving my network.
Rocky J. Allen
Comentado en los Estados Unidos el 22 de abril de 2019
UPDATE: I found the secret to this router: Do the initial setup with wizard, then throw the web interface away until you have it built. For some reason changes are not reflected right away in the web interface. Changing to 5 stars. I love this router.USE THE CLI = beerI bought this router a week ago. I have dual ISP's, [snip] IoT subnets, and a human one. Setup was simple / trivial but it didnt work. I set eth0 and 1 as wans, then used 5 and 2 as leads to switches. I got on the console, read the logs. Yikes, a lot of f*ed up messaged such as "ioctl blah", "dhcpd blah", "firmware not loaded", etc. reboot, upgrade to 2.01, back on track, but not with the same config. I pretty much had to rewrite my entire network to avoid hitting one of the myriad of bugs the code has . hardware bugs, software bugs, load balancing bugs. Ubiquity should maybe outsource their QA pipeline, because they arent getting it done in-house.
Recon
Comentado en los Estados Unidos el 29 de diciembre de 2018
Ubiquiti has a large lineup of wired routers, so it took me awhile to narrow my choice down to this one.This router only does 24V PoE and does NOT have a switch chip. I don't care, I don't need PoE and already had a switch.What I needed was a high performance router that had a decent QOS implementation. My family between all the streaming and devices was overloading previous routers, ASUS RT-AC68A and Netgear (R7800-100NAS) Nighthawk X4S.This router has run for months without issue, exceptional performance with the QOS reducing bufferbloat to nothing. The CPU rarely gets above 15%.Ubiquiti has solid support via their forums, which I relied upon during initial setup as I am not overly technical when it comes to routers.
Productos recomendados

Mex $959.66

Mex $ 489 .00 Mex $489.00

4.9
Elegir